Specifications

Tire Sealer & Inflator
Tire Sealant
Fix your tires in a minutes
applicable to breach within 6mm
No jack nor tyre-chang

CAPTAIN Tire Sealer & Inflator (Tire Sealant) is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-change is needed. One step procedure of tyre pumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage. Non-toxic and odorless. No corrosion and no damage to the tire.

Item No.	ID-309
Can Size	65mm x 158mm H
Package	450ml x 12pcs/ctn
Carton Size	275x205x205 mm
20ft Container Loading	2500 cartons

 

 

• 
  1.     If possible remove object causing puncture.
  2.     Deflate the tyre; Shake the can well before use;
  3.     Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.
  4.     After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.

   

• 
  1. It is just for emergency use. Repair your punctured tire with Rubber Patch at your earliest possibility.
  2. Keep away from heat, flame, spark and other source of ignition.
  3. Store in a cool, dry place (45C); Avoid direct sunlight.
  4. Do not clash, puncture, or incinerate the can.
  5. Keep out of reach of children;