new articulated loader, construction wheel loader, China construction machinery
Negotiable /Unit
Min.Order:1 Unit
Taian Dongyue Carrying Machinery Co., Ltd.
new articulated loader, construction wheel loader, China construction machinery
construction wheel loader
1.Market familiar design
2.easy operation by joystick and buttons.
3.Hydrostatic four wheel drive,
4.Low Fuel Consumption
5.With CE certificate
6. Adjustable spring seat
7.Telescopic boom
8.Self levering.
9. Axle with hub reducer
10.Pressure testing connector on chassis
construction wheel loader
1.ROPS Cabin or canopy can protect the driver in any case if there’s a tilt danger.
2.Top rotating warning light give an eye-catching signals to people around.
3.Warning signals for maintenance and operating protect the machine from over-use.
4.Reversing beeper and lights, traffic lights, rear and front working lights well protects people around and also the operator.
5.Cylinder protection can prevent any possible damage caused by the boom falling down.
Model | TL1500 | |
Engine Details | Engine model | Changchai 4L68 |
| Engine power | 36.8KW (50H.P.) |
| Rated Speed | 2400 r/p.min |
| Engine cooling way | Water cooling |
| Fuel Consumption ratio | 230g/kw.h (standard working condition) |
| Engine type | In-line arrangement,4 cycle diesel Engine |
Bucket | Bucket Capacity | 0.8 m3 |
| Bucket width | 1700mm |
| Bucket type | Heavy-duty bolt on teeth |
Overall Dimensions | Overall Length | 4390mm |
| Overall Height | 2720mm |
| Overall Width | 1870mm |
Tyre | Model | 20.5-16, 12ply |
| Width | 307mm |
| Diameter | 831mm |
Brake System | Service Brake | Four Wheel disk brake |
| Parking Brake | Hand operated |
Max. lifting Height | 4250mm | |
Rated Load | 1500kg including attachment | |
Transmission System | Hydraulic converter + drive shaft + axles | |
Wheelbase | 2400mm | |
Track | 1345mm | |
Min Turning Radius: | 4950mm | |
Weight | 3960kg(without bucket) | |
System Pressure | 20Mpa | |
Hydraulic output | 96L/min | |
Max. Height to the Pin | 4200 mm | |
Braking Type | Air braking | |
Axle | With hub reducer |
1.For the new machine, within determined limits, the manufacture guarantees for a period of 12 months after bought or 1000 working hours(whichever comes first).
2.The warranty includes repairation or replace the parts for free which were proved to be defective in origin by the technical department of the manufacture.
3.The repairation or replacement for the parts should not exceed the warranty period.
4.The warranty is valid on the condition of all the terms listed in the contract was observed.
If you are interested in this machine and need a quotation, Please contact with: Steven.