split solar water heater system production line
USD $300 - $600 /Set
Min.Order:1 Set
The heat pipe of vacuum tube thermal collector can absorb the radiation and then to store the energy in the manifold. The circulating pump is pumping the water or liquid from the manifold to the water storage tank. The whole system pushes the hot water down to the storage tank as well as pushing the cold water up into the manifold and then to absorb the solar radiation in the meanwhile. But the work station can get the different temperature of water between the storage tank and manifold, and then to control the circulation pump ON or OFF. Therefore, it is easy to retrofit the whole system as it can Increase or decrease the numbers of thermal collectors when it is required to do so.
Application: Residential, condo, resort, apartment, hotel, motel, tour van and industries.
Quantity of heat pipe vacuum tube: 20 tubes
Technical Parameter
Thermal Collector:
Absorber: Heat pipe evacuated tube.
Thermal Absorption: ≥0.86%
Thermal Emissivity: ≤0.08%
Coating: AL/AL-ALN; CU/SS-ALN.
Material of Heat Pipe: Copper.
Manifold:
Material: Copper
Outer Coverings: Aluminum-alloy
Connections: 3/4”( Inlet & Outlet)
Pressure Resistance: 0.7 Mpa
Testing Pressure: 1 Mpa
Evacuated Tube:
Outer Diameter: Ø58 mm
Length: 1,700 mm
Material: High Boron Silicon Glass 3.3
Thickness: 1.6 mm
Frame:
Material: Aluminum-alloy.
Dimension:
1450 X 1950 X 135 mm
Antifreeze:
Antifreeze liquid refers to the local relevant standard.
YUHO flat plate solar water heater have approved by
YUHO is a Taiwan solar water heater manufacturer produces and distributes high quality MADE IN TAIWAN products all over the world. All of our products are pressurized and can be used both domestically and industrially. With our advanced R&D ability and 15 years service experiences, we are the only manufacturer in Taiwan who can provide the large commercial solar water heater system solution. Additionally, our products have already past all tests, and get the solar keymark ( Europe ) and the SRCC ( U.S.A.) certificate.
Material | Stainless steel 304 / 316L |
Outer Diameter | 16.1 / 18 / 20 / 26.5 / 31.7 / 38.5 mm |
Wall Thckness | 0.22~0.25mm |
Heat treatment | Optional |
Packing | Plastic bags or carton |
Application | Water or Gas |
Coating | optional ( white / black / yellow ) |
Brass fitting parts for stainless steel 304 corrugated pipe
Grade | C3771 / 58-1 / 59-1 / C3064 |
Size | 15A / 20A / 25A / 32A 17.8 / 25.6 / 31.7 / 38.5mm ( Outer Diamer ) |
Thread | 1/2" , 3/4" , 1" ( Internal & External ) |
Type | Coupling / Tee / Cap / Elbow female & male / |
Q : Are you manufactuer or trader ?
A : YUHO is a professional manufacturer for more than 10 years in Taiwan.
Q : Is it made in Taiwan ?
A : yes, 100% made in Taiwan with high quality control process.
Q: How can I get to your factory ?
A : The factory is located in the middle of Taiwan. High speed train from Taipei to our city takes around one hour. We will pick you up from the chaiyi station. Websit of high speed rail .tw/en/
Q : Do you have office in Taipei ?
A : NO, We are manufacturer and wellcome to visit our factory.
Q : Can I get a sample ?
A : yes, we provide 30cm pipe free sample for you to check the quality.
Q : Can I order customized tube?
A : yes, we do customized. We will need detail drawing, photo and sample from you.