CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.

High Quality Fractional co2 laser equipment

The carbon dioxide laser treatment is suitable for general surgery, dermatology, gynecology, ENT, paediatrics, urology. It is mainly through cutting, burning, carbonization, gasification, hemostasis way to heal. This product is especially suitable for plastic surgery after dispel various wrinkles, acne and acne scars, surgical scars, traumatic scars, benign skin tumors, etc.

Physiotherapy: skin numbness, neck frozen shoulder, arthritis, inflammatory mass, chronic ulcers, vasculitis, frozen shoulder, soft tissue injury, wound infection, beam expander irradiation.

CO2 Laser uses advanced CO2 laser treatment technology, safe and effective treatment for mild treat your skin. No discomfort such as burning tingling, acupuncture or peel; no swelling after the treatment of the entire zero infection.

Applications

Technology of Ultrapulse
Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).

Application:

1. Application Range of Fractional treatment handpiece
    a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
    b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
    c. Reconstruction of photoaging skin.

2. Application Range of Incision Handpiece
    a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
    b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc

Features:

1. Particular designed intelligent laser control system ensures a precise treatment.

2. Laser energy shooting is an even steady and safe treatment process.

3. Wide range application, effective treatment.

4. Easy and fast treatment, no down time.

Technical Parameters

Laser Model: kaboer100 carbon dioxide laser

1) Laser wavelength: 10.6μm

2) Output power :1-40W (single pulse)

3) in matrix form: super pulsed light scanning

Scanning pattern: rectangular, square, circular, oval (standard), triangular, hexagonal, and the straight line

Scanned points: 400 points

Pulse energy: each point is 5 mJ to 100mJ

Total pulse energy: 125mj-1kj

Focus spot diameter: ≤ 0.1mm (FFLS), ≤ 0.2mm (HFLS)

Spots interval: 0.001s

4) guidelines beam: red semiconductor laser (≤ 5MW)

5) The Daoguang system: seven joint torsion spring articulated arm

6) Control Panel: 10.4-inch color touch screen

7) Cooling System: Built-sealed water cooling circulation system

8) Power supply: 100/110V, 50-60Hz; 230-260V, 50-60Hz

♥ Wish you have a good time in our website, we have many kinds of machines.

Cavitation/RF/Vacuum/Mesotherapy/Presstherapy/Dermabrassion/Dermaroller/

E-light/Photon/Almighty Oxygen Jet/PDT/Skin Analyzer/Waterbike and so on.

if any questions related to our products or company

Please don't hesitate to contact us online or use following information:

---Office Tel: +86-20-86254618

---Fax: +86-20-37325859

---Customer Service Hours: 09:00--18:00 Pacific Time

Address: Rm303, Dibao building, No. 472, West of Huangshi Road, 

Baiyun District, Guangzhou, China 510440

OUR VALUE MESSAGE IS “QUALITY IS OUR CULTURE”
“WITH US YOUR MONEY IN SAFE YOUR BUSINESS IN SAFE”
1. 100% after-sales quality assurance, Support Many payment method;
2. All other specifications of beauty equipment are available according to your requirement(OEM&ODM)! Factory price you will get from NUBWAY
3. We can provide professional operation training.
4. Nd yag laser, cryolipolysis machine, hair laser machine etc with CE certifications and strong supply ability.