Product Details

Fiber Optic Cable protection HDPE Pipe with various customer size:

1.Material : HDPE silicon core pipe is a new type of composite pipe with silicon solid lubricant in inner layer, which be widely used in optical communication network system of highway ,railway etc, the main material is High Density Polyethylene

Features

2.Feature:

1) Good sealing properties, chemical resistance, low construction cost

2) Protects and guides cable, instead of steel tube and cement tube
3) Strong, corrosion-resistant, high-temperature resistant
4) No need for cement protecting, low cost.

5)The inner layer silicon core is solid and permanent lubricant

6) The inner layer silicon core is being co-extrusion pressed into high-density polyethylene pipe , and evenly distributed throughout the pipe wall, not shed off, same lifespan with silicon tube

7) The inner layer silicon core and high-density polyethylene pipe have the same physical and mechanical properties;

8)The inner layer silicon core keeps the same friction characteristic,Cable in the pipe can be repeatedly extracted;

9) The inner layer silicon core does not react with water, can rinse with water after accident

Applications

3. Applications:

1). Widely used in highway, railway and other optical cable communication network system ;

2). Widely used in Outdoor communication cable,public

information network , public transport system,cable TV network, freeway communication,Cable pipe system

3) Telecommunication, Computer Network, Automatic Signaling, Railways Information Network, Highways, Cable Service providers, Broad Band networks, Electric cable installation etc.

Advantages

4.Advantages:

1). Adopt multi-machine co-extrusion, the silicon core layer is synchronously embedded in the pipe. It will be permanent lubricated and not be stripped forever

2). The friction coefficient of the inner wall is very small. Optical cable (electric cable) can be repeatedly extracted and tension in the pipe.

3). Waterproof, damp-proof, can avoid the damage by rodent animals.

4). Aging-resistant, anti corrosion of chemicals, long service with 50 years

5). Good weather resistant ability, and its suitable temperature from -40°C to 100°C.

6). Convenient in construction, save time and the project cost

5.Technical data of HDPE Silicon Core Pipe:

No.	Item	Performance
1	Appearance	Appearance color uniform; Smooth inner & outer wall with uniform, no collapse, no holes, no tear tracks, no bubble or crack; Inside layer with closely sinter, no excuse; Outside layer with complete and clear product identification
2	Thickness of wall	2mm to 6mm or as customers' need
3	Stiffness of outer Wall	≥ 59 (Shore-D)
4	Tensile Strength	≥ 2.0 MPa
5	Elongation at break	≥ 380 %
6	Maximal Pulling Load	≥ 8000 N
7	Friction Coefficient of Inner Wall	static state ≤ 0.25 dynamic state≤ 0.15
8	Cold bending radius	400mm
9	ring stiffness	≥50(KN/m2)
10	Flatting test	Unload immediately after being vertically pressed till 50% distortion of original outer diameter, the sample is no not broken, not hierarchica
11	Recovery rate	Unload immediately after being vertically pressed till 5% distortion of original outer diameter, the sample is no crack. The outer diameter can recovery 85% after 10 min
12	Drop hammer impact resistance	In the temperature -20℃, the height is 2m, using 15.3kgs hammer to impact 10 samples, more than 9 samples are no crack.
13	Resistance to water pressure sealing performance	Under temperature 20℃and pressure 50Kpa, can keep 24 hours without leakge
14	Heat reversion	≤ 3%
15	longitudinal shrinkage ratio	≤ 3.0%

Product Description

6.Specification :

Specification (OD/ID)	OD (mm)	OD allowable deviation (mm)	ID min (mm)	Thickness of inner layer	Elasticity
Specification (OD/ID)	OD (mm)	OD allowable deviation (mm)	ID min (mm)	Thickness of inner layer	before coiling	after coiling
25/20	25	0.3	20	2.5	≤1.5	≤2
32/28	32	0.3	26	3	≤2	≤3
40/33	40	0.3	33	3.5	≤2.5	≤3.5
46/38	46	0.4	38	4	≤3	≤5
50/41	50	0.4	41	4.5	≤3	≤5
63/54	63	0.4	54	5	≤3	≤5