factory OEM Oil Seal  TSN 510 AV-RING series 

Oil Seals: Designed to aid trouble-free operation of your equipment, providing an excellent barrier against the escape of oils and greases and preventing the ingress of foreign matter. 
Benefits: Excellent wear resistance, good running properties, high resistance to chemicals and petroleum based fuels including petrol, diesel and LPG.

  The TC Oil Seal is specifically designed to keep out water and dirt. The rubber coated outside diameter creates an optimum seal at the hub. The steel garter spring guarantees constant pressure on the axle shaft over the life of the seal. Great for replacing your damaged oil seal.

factory OEM Oil Seal  TSN 510 AV-RING series 

Resistance to temperature extremes:  

Heat 

Viton® withstands high temperature and simultaneously retains its good mechanical properties better than most other elastomers. Oil and chemical resistance also are relatively unaffected by elevated temperatures. Compounds of Viton® remain usefully elastic indefinitely when exposed to laboratory air oven aging up to 204°C (400°F) or to intermittent test exposures up to 260°C (500°F). High temperature service limits are generally considered to be:

3,000 hr. at 232°C (450°F)
1,000 hr. at 260°C (500°F)
240 hr. at 288°C (550°F)
48 hr. at 316°C (600°F)

factory OEM Oil Seal  TSN 510 AV-RING series 

Cold 

1.Viton is generally serviceable in dynamic applications down to -18° to -23°C (0° to -10°F), although special formulations permit its use in static applications down to -54°C (-65°F). Also, Viton® has proven to be satisfactory for static seals used under conditions approaching absolute zero.

2. Resistance to degradation by a greater variety of fluids and chemicals than any non-fluorinated elastomer, providing the best proven fluid resistance of any commercial rubber. Excellent resistance to oils, fuels, lubricants, and most mineral acids.

3. Extremely low permeability to a broad range of substances, including particularly good performance in oxygenated automotive fuels.

4. Resistance to many aliphatic and aromatic hydrocarbon fluids that act as solvents for other rubbers.

5. Exceptionally good resistance to compression set, even at temperatures which can embrittle other non-fluorinated elastomers.

other model same as factory OEM Oil Seal  TSN 510 AV-RING series 

other model of oil seals reference :

Our Service:

1.Customer service:

Any questions to be sent will get response within 24 hours.

2.Lead Time:

Sample Lead-times: generally 7 workdays.

Production Lead-times: 15-20 workdays after getting your deposit.