iko GE40ES spherical plain bearing forklift bearing 

Specification                                                                                                                     

1. Types:  GE,GEC,GEG,GEEW,GEK,GEH etc

2. Materials: Metallic materials like brass,bronze,iron or steel and often plated with zinc or chromium

Non-mentallic materials like plastic, nylon

Features:

The outer ring has an axial slit.

ES type of inner and outer rings with lubricating groove and hole

2RS type of outer ring with seals at both sides

Inner and outer circle surface phosphating treatment

Spherical Plain Bearings
GE...E, no lubrication oil every outer. Can bear radial load and any direction of smaller axial load.
Spherical Plain BearingsGE...ES

GE...ES type, single slit outer oil lubrication. Can bear radial load and any direction of smaller axial load.
Spherical plain bearing(GE...ES-2RS)

GE...ES - 2RS type, single slit outer oil lubrication, with seals at both. Can bear radial load and any direction of smaller axial load.

application of joint bearing:

Joint bearing is widely used in engineering hydraulic cylinder, forging machine tools, 

engineering machinery, automation equipment, automobile shock absorber, 

water conservanc

original IKO rod bearing GE40ES in stock  

 original IKO rod bearing GE40ES in stock  :

 original IKO rod bearing GE40ES in stock  :  

Our professional equipment :

Our main products:

Our advantages:

1. More than ten years bearing products exporting experiences.

2. OEM order and non-standard bearing order can be accepted.

3. Many sizes of bearing are available. Large quantity bearing can be provided.

4. To respect customers, you can choose the loading port.

5. A certain number of free sample can be provide to support our customer's after-sale services and warranty.

Other attention notes:

1.Rod end the force required to install rod ends size and cooperate with related to the size of the amount of interference, the interference to the large amount of medium or large hot charging methods commonly used rod end bearing.Hot charging before the rod end or separable bearing ring into the fuel tank or dedicated heater evenly heated to 80-100 °C, not more than 100 °C. 

2.Installed the rod end should be slightly rotating to avoid installation of dumping or jammed.

3.Bearing in the process of operation, there must be the phenomenon such as sound,temperature and vibration, can after hear, touch, and using the bearing fault diagnosis instrument to find it abnormal change whether bearing should stop maintenance care

If this type bearing can meet your demand,please contact me for more information.