Product Details

Applications:

Widely used in production site to measure surface roughness of various machinery-processed parts, calculate corresponding parameters according to selected measuring conditions and clearly display all measurement parameters.

* Be compatible with four standards of ISO, DIN, ANSI and JIS. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism inside the tester. The sensor gets the surface roughness by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD.

* Multiple parameter measurement: Ra, Rz, Rq, Rt.

* Highly sophisticated inductance sensor.

* Four wave filtering methods : RC, PC-RC, GAUSS and D-P.

* Built-in lithium ion rechargeable battery and control circuit with high capacity.

* Small in size, light in weight and easy to use.

*Manual or automatic shut down.

* Can memorize 7 groups of measurement results and measuring conditions for later use or download to PC.

* Metric /Imperial Conversion.

* Use “USB data output” and “RS-232 data output” to connect with PC.

* Provide “Bluetooth ™ data output” choice.

Display		4 digits, 10 mm LCD, with blue backlight
Parameters		Ra,Rz,Rq,Rt
Measuring Range		Ra,Rq:0.005~16.00 um / 0.020~629.9 uinch Rz,Rt:0.020~160.0 um / 0.078~6299 uinch
Accuracy		≤ ± 10%
Fluctuation of display value		Not more than 6%
Sensor	Test Principle	Inductance type
	Radius of Probe Pin	5 um
	Material of Probe Pin	Diamond
	Dynamo-measurement of Probe	4 mN(0.4 gf)
	Probe Angle	90°
	Vertical Radius of Guiding Head	48 mm
	Maximum driving stroke	17.5 mm / 0.7 inch
	Cutoff length (l)	0.25 mm / 0.8 mm / 2.5 mm optional
Driving speed	Sampling	When Length = 0.25 mm, Vt = 0.135 mm/s
		When Length = 0.8 mm, Vt = 0.5 mm/s
		When Length = 2.5 mm, Vt = 1 mm/s
	Returning	Vt = 1 mm/s
Profile digital filter	Filtered Profile	RC,PC-RC,GAUSS
	Non-Filtered Profile	D-P
Resolution		0.001 um, if reading < 10um
		0.01 um, if 10um ≤ reading ≤ 100um
		0.1 um, if reading ≥ 100um
Evaluation length		1~5 L optional
Auto Power Off
Data Memorize		7 Groups
Operating conditions		Temperature: 0~50 ℃ Humidity: < 80 %RH
Power Supply		Built-in rechargeable Li-ion battery
Dimensions		140 × 52 × 48 mm
Weight		420 g