ceramic heater for plastic machines
USD $1 - $15 /Piece
Min.Order:10 Pieces
Yancheng Duopu Import & Export Co., Ltd.
ceramic heater for plastic machines
The most common size are 60x60mm, 120x60mm, 120x120mm, 240mmx60mm 245x80mm.The output power can be from 100W ~ 1000W with different input voltage.The Infrared ceramic heater can be used for many application especially in thermoforming. It has unique design with fast heating, good heat insulation feature. More energy save than other ceramic heaters
ceramic heater for plastic machines
1.Radioactive properties: a maximum monochromatic radiation components reached 0.9,the normal total radiation rate is greater than 0.83.
2.Thermal response time: from room normal temperature to a constant value of the radiant panel surface temperatures less than 20 minutes.
3.Degeneration of hot and cold resistance : five alternating hot and cold test of no peeling,no cracking.
4.Radiating temperature inhomogeneity≤15%
5.Power error : the rated working voltage ≤5%
6.Cold insulation resistance :500V Megger >2 ohm
7.Thermal insulation resistance: 500v Megger >0.5ohm
8.Use life:40 months
OEM&ODM service
ceramic wall heater
1. Why the price is so low?
You are ordering to the direct factory .
2. Where is your factory located? How can I visit there?
Our factory is located in Yancheng City, Jiangsu Province, China .
It takes 4.5 hours by bus ride from Shanghai .Warmly welcome to visit us freely .
3. What type of payment do you have available?
A: TT and L/C
B: West Union,Money gram and Aliexpress are available for sample order .
4. How can I get some samples?
Contact with us directly.
5. How does your factory do regarding quality control?
Quality without compromise, DUOPU always attach great importance to quality controlling from the very beginning to the very end.
6. Do the IR Heaters need to be covered?
The Comfort IR Ceramic Units are protected against water ingress (IP4). However, it is highly recommended they are installed in a covered outside area to give maximum protection, effectiveness and comfort levels.
7. Do the heaters have a red glare?
The Comfort IR Ceramic Heaters do not have any glare, which is one of the advantages over standard quartz/halogen bulb unit.
8. How much area do they cover?
For outdoor use, based on your outside space, the number of Comfort IR Unit(s) will vary. Please call for your specific situation.
9. How long do the IR units last?
Comfort IR Ceramic Heaters are guaranteed for 40 MONTHS from date of purchase. Warranty evaulations are per instance. Operating under normal / recommended conditions will get the longest life out of the Comfort IR heaters.
10. How do I clean the heaters?
When they are turned OFF use a soft cloth and warm soapy water.