4,3degree Monoblock Quad LNB
Negotiable
Min.Order:1
4,3° Monoblock Quad Black 0,2dB
Specifically designed for the European DTH markets, this Monoblock LNB allows for dual satellite reception. This LNB can be used for satellite broadcast (on an 80cm dish antenna) reception of any two satellites spaced with 4,3°. This LNB enables the signal distribution to maximum four Set Top Boxes with Single Tuner (or two STBs with Twin Tuner). It is optimized for High Definition transmissions and provides excellent Noise Figure performance. Designed to meet strict specifications and manufactured to the highest industry quality standards, this LNB is an ideal solution for satellite broadcast reception across Europe.
Main Features
Low Phase Noise, DVB-S2 (HDTV) compliant
Low Noise Figure (0.2 dB)
Low Power Consumption
Very high Cross Polarization Isolation
Very high Frequency Stability
Technical specification:
Low Band Input Frequency Range
10.7 ~ 11.7 GHz
Low Band Output Frequency Range
950 ~ 1950 MHz
Low Band LO Frequency
9.75 GHz
High Band Input Frequency Range
11.7 ~ 12.75 GHz
High Band Output Frequency Range
1100 ~ 2150 MHz
High Band LO Frequency
10.6 GHz
Noise Figure
0.2 dB Typ. (0.7 dB Max.)
LO Initial Accuracy
+/- 1.0 MHz Max.
LO Temperature Drift
+/- 3.0 MHz Max.
Phase Noise (@ 10 kHz)
- 90 dBc / Hz Max.
Conversion Gain
50 ~ 60 dB
Gain Ripple (Over 26 MHz Bandwidth)
+/- 0.75 dB
Gain Variation (Over Full Band)
+/- 4 dB Max.
Image Rejection
40 dB Min.
1 dB Compression Point (@ Output)
0.0 dBm Min.
Control:
Satellite A/B Selection DiSEqC 1.0
Sat A* = Eastern Satellite Position,
Sat B = Western Satellite Position
Cross Polarization Isolation
22 dB Min.
Output VSWR
2.5 : 1
In-Band Spurious
- 60 dBm Max.
Current Consumption
250 mA Max. @ 11 ~ 20 V
Operating Temperature
- 30 °C ~ + 60 °C
Output Impedance
75 Ω
Output Connector
F-Type (Female)
Weight
485 g
Recommended Dish Size
75 ~ 85 cm (F/D = 0.6)
Monoblock Mounting Bracket
23 mm
* Default Satellite Reception