Specifications

1)Size:120X2.8/3.6X22
2)SKS-51 body material
3)High performance
4)Precise cuts,extremely stable

 more information about saw blade for panel sizing machine /Tungsten Carbide Circular Saw Blade Fswnd Natural Wood Cutting as below:

 

 

1,Saw blade teeth

One of the most important things to look for in a saw blade is a good set of teeth.How long the blade will stay sharp,how clean it will cut,and how many re-sharpenings it will take all depend on the quality of the cutting tips.The saw blade teeth of Fswnd saw blade are imported from Luxemberg,it is hard enough to bear high pressure.

2, Tooth configuration

 

The saw blade teeth alternate between a right and left hand bevel.This tooth configuration gives a smoother cut when crosscutting natural woods and veneered plywood.The alternating beveled teeth form a knife-like edge on either side of the blade and make a cleaner cut than falt teeth.

3.Different sizes:

Outer diameter(ØD)mm	Teeth width(B)mm	Thickness(b)mm	Inner diameter(Ød)mm	Teeth number(Z)	Teeth type(C)	Use(U)
80	2.8-3.6	2.0	20
100	2.8-3.6	2.0	20
100	2.8-3.6	2.0	22
120	2.8-3.6	2.0	20
120	2.8-3.6	2.0	22		left/right combine teeth	Used for cutting various soft and hard solid wood
125	2.8-3.6	2.0	20
125	2.8-3.6	2.0	22
160	4.0-5.2	2.5	20/60

 4.Some models: