It is one of the important material of construction of skating field. Can greatly save skating site construction and maintenance costs. And my company produces ultrahigh molecular polyethylene skate board has to get the orders in a number of countries, are exported to various countries in the world, and has been praised.

 Advantage

1,ISO9001:2008 Quality Certification

2,Good wear resistance;

3,good self-lubracation;

4,Low temperature resistant;

5,non water absorbtion, non stick;

6,highly corrosion resistance, etc.

7,Quick installation: quick assembly/disassembly indoor and outdoor.

8,Low cost: low operating and maintenance costs. Project cost 1/5 with real ice. It does not require refrigeration and ice. Use in any place and any weather conditions.

9,Simple skating: natural ice skating similar experiences.

10,Environmental protection: no pollution, no noise, can be recycled, saving water, saving energy.

11,Long service life: life will greatly exceed the traditional plastic ice.

Application

Plastic PE shooting pad/Extreme Professional Hockey Shooting pad

shooting pad for artificial ice rink/Hockey Shooting Mat

Hockey Shooting Pad/ Stickhandling Skill Pad

Shooting and Stickhandling Training Pad

Shooting Pad/shooting-pad-with-handle-meme

Hockey Junior Shooting Pad/Professional Hockey Shooting Board

HockeyShot Shooting Pad

Hockey Shooting Pad/extreme-passing-kit-hockey-shooting-pad

Synthetic Ice SkillPad and Shooting Board/HockeyShot Professional Shooting Pad

Hockey Practice Shooting Pad/Hockey Shooting Pad/Gloss PEHD ice hockey shooting pad

Hockey Gloss PEHD ice hockey shooting pad/Coach pad/exercise pad

Size





1000x1000x15mm;



1000x1000x20mm;



1000x1000x25mm;



1000x2000x15mm;



1000x2000x20mm;



1000x2000x25mm.

Polyethylene (PE) is the most commonly used plastic polymer in the world with annual consumption rates exceeding 50 billion pounds per year. Over 70 percent of Porex products use polyethylene.

Thermal insulation materails used widly

Air-conditioner, water or wind piping system, the essential material for sealed buffer coating film etc.

Sound insulation, thermal insulation, buffer material, construct, hollow, refrigerator, automobile etc

With a linear molecular structure of repeating –CH2-CH2-units, PE is a semi-crystalline polymer that elongates before breaking, enhancing its toughness. In general, PE is considered a strong, lightweight thermoplastic with very good chemical resistance. Products made from standard polyethylene grades typically have pore size diameters ranging from 7 to 150 micrometers, but these nominal values can be increased to 300 micrometers with special blends.

HIGH-DENSITY POLYETHYLENE (HDPE)

Porex high-density polyethylene (HDPE) is available in sheets, rods, tubes and molded shapes. HDPE can be used in continuous service at temperatures up to 180° F (82° C) and intermittently at 240° F (116° C). If not stressed, it is stable at 212° F (100° C) in continuous service.

ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE (UHMWPE)

As with high-density polyethylene, Porex ultra-high molecular weight polyethylene (UHMWPE) comes in sheets, rods, tubes, and molded shapes. UHMWPE is a strong, lightweight material embodying all the characteristics of high-density polyethylene (HDPE) plus the added feature of being resistant to concentrated acids and alkalis as well as numerous organic solvents. This material has the same temperature limitations as HDPE. Average pore size in micrometers: 10 and 20.

Packaging
1.Pallet with strech film
2.customized wooden case
3.carton
4.others as request

Delivery day

Within 20 working days from the date that the seller receives the total order amount from the Buyer.

Payment terms
50% T/T deposit, balance paid against B/L copy ; or L/C at sight.

Ningjin County Chemical Co., Ltd., strong technical force, scientific research, development, production and sales, is currently China's domestic research and production of high performance engineering plastics, one of the largest manufacturers of plastic products, access to a number of national patents, ministerial honor certificate. Advanced equipment, the use of Japanese production process, German equipment, for the company's product quality to provide a solid foundation. Production company, the company's main products are ultra high molecular weight polyethylene sheet, bunker lining board, nylon plate, fender veneer, high polymer wear-resisting plate, PE sheet. 

Why choose us

1. More than 20 years professional manufacturing experience!

2. Competitive price,high quality,delivery on time

3. Any size,any shape,can fully satisfy custom requirements

4. 100% Virgin material produced

5. Long-term export experience

6. SGS approved and FDA approved

Advantage

Low MOQ: It can meet your promotional business very well

OEM Accepted: We can produce any your design

Good Service: We treat clients as friend

Good Quality: We have strict quality control system,Good reputation

Fast & Cheap Delivery: We have discount from forwarder

1.What are the minimum and maximum temperature operating ranges?

-180 to 82.22 Celsius

2.Whether can according to customers drawings for processing?

Yes, we can customize according to your idea.

3.Are your sheet self-lubricating?Can be like real ice?

Yes, they are self-lubricating.Just like real ice to use.And according to our costomer is very good.

4.What is engineered thermoplastic?

It’s an incredibly strong and dense industrial plastic. From a chemistry standpoint, it has very long molecular chains which provide it’s strength and high yield resistance.



If you have any questions, please feel free to contact me,

I will reply you as soon as possible, look forward to your enquiry ^_^

Arianna Chen

NingJin Country HongBao Chem Co.,Ltd

Add: Dacao Indusrtrlal Park,NingJin Country,ShanDong China

Fax: 86-0534-5239877

Phone/Whatsapp:86-15865340701

QQ：416380207

W:  

24 hours a day, 7 days a week!
Have questions? Please tell Arianna, you may got the FIRST TIME REPLY!
All your questions will be replied in 8 hours!
This info is long-term effective.