Product Details

High Quality virgin Polyethylene PE Plastic Sheets

Our standard size of High Quality virgin Polyethylene PE Plastic Sheets :

Mould Size:
Length(mm)	Width(mm)	Thickness(mm)
6130	2080	10~350
4450	1820	6~120
5300	1250	6~180
Suggested Dimension:
Length(mm)	Width(mm)	Thickness(mm)
1300	900	10~350
1040	600	10~350
870	450	10~350
650	400	10~350
520	300	10~350
440	360	10~350
Or other dimensions can be customised!

Properties of High Quality virgin Polyethylene PE Plastic Sheets:

Items		Testing Method	Unit	Result
Physical Property	Density	D1505	G/cm³	0.95-0.98
Mechanical Property	Breaking Strength	D638	N/cm²	2900
	Elongation @ Break	D638	%	350
	Elongation @ Break	D638	%
	Tensile strength @ yield	D638	Psi	4,600
	Tensile Impact	D1822	Fl-Ib/in	120
	Notch Impact Strength	D256	CJ.cm/cm²	Not Destroyed
	Flexural Modulus	D790	Psi	225,000
	Hardness (Rockwell)	D747/2240		40-80/69
Thermal Property	Melting Point	D2117	℃	136
	Vicat Softening Point	D1525	℃	134
	Coefficient of Linear Thermal Expansion	D696	In./in./oF	6 x 10-5
	Low temperature Brittleness F50	D746	oC	<-76
	Heat Deflection Temperature @66 psi	D648	oC	82
	Maximum Service Temperature, Air	Long Term	F	180
	Maximum Service Temperature, Air	Long Term	oC	82
	HDT (0.46 Mpa)	D648	℃	85
Electrical Property	Volume Resistance	D257	SL-CM	1017
	Breakdown Voltage	D149	Kv/mm	50
	Dielectirc Constant	D150		2.3
Others	Water Absorption	D570	%	<0.01
	Scaling			Uneasy to scale
	Flammability Rating	UL94 HB
	Compliances	FDA, USDA, NSF

About us, the High Quality virgin Polyethylene PE Plastic Sheets manufacture overview:

A. Extremely high wear resistance, which is higher than common metals or plastic products due to its unique molecular structure.

Material

UHMW-PE

PTFE

Nylon 6

A3 Steel

PVC

Red Copper

Wear rate (%)

0.32

1.72

3.30

7.36

8.63

13.12

B. Excellent self-lubricating property, low friction coefficient, low flow resistance, energy-saving

Material

UHMW-PE-Coal

Glass-ceramic Plate-Coal

Rusty Steel Plate-Coal

Rustless Steel Plate-Coal

Concrete -Coal

Coefficient of Wear

0.15-0.25

0.30-0.45

0.45-0.58

0.30-0.40

0.60-0.70

C. High impact strength, good toughness, it can keep well even when be impacted badly in the low temperature.

Material

UHMW-PE

Glass-ceramic Plate

PAE6

POM

45”

Impact Strength (KJ/M3)

100-160

1.6-15

6-11

8-13

300-400

700

D. Excellent chemical resistance, almost resistant to all acids, alkali, and salt medium (except concentrated sulphuric acid, concentrated nitric acid, a small number of organic solvents)
E. Non-toxic, odourless, non-exudate
F. Good electrical properties, low water absorption
G. Excellent resistance to environmental stress cracking resistance, is 200 times that of ordinary polyethylene
H. Excellent low temperature performance, no embrittlement cracking even in -180 °C