Name: Sand blast chamber abrasive steel grit gl40 for compressor disks sandblasting
Brand: Honest Horse
Availability: InStock

Product Details

abrasive steel grit gl40

Product Description

Steel grit Description

Steel Grit is an angular metallic abrasive produced by crushing bearing steel. Steel Grit is used for descaling,

coating and corrosion removal, and surface etching. The angular particle shape provides a fast cleaning rate

and an angular surface profile.

Steel Grit is tempered to three different hardnesses. The hardest material, GH, is designed for use exclusively

in air blasting equipment,stone cutting. The two softer materials, GL and GP, may also be used in centrifugal

wheel blast equipment.

Steel Grit picture

Steel Grit Size:G10 G12 G14 G16 18 G25 G40 G50 G80 G120

Steel Grit Specification

Product Name	Chemical Composition
Chemical Composition	C	0.701.20%
	Cr	0.60-1.60%
	Mn	0.61.20%
	Si	0.401.20%
	S	≤0.05%
	P	≤0.05%
Micro Hardness	GP:4250HRC (399509HV) GL:5660HRC (620713HV) GH:6366HRC (795889HV)
Hardness Deviation	Max Deviation ±3.0HRC,±40HV
Type	G10 G12 G14 G16 G18 G25 G40 G50 G80 G120
Diameter	2.5mm2.0mm1.7mm1.4mm1.2mm1.0mm0.7mm0.4mm0.3mm0.2mm
Microstructure	Even tempered martensite and dispersed carbon
Quality Standard	SAE, ISO9001
Durability	≥3000 times
Shape	Angular

Warm Notice: Cast steel grit contains no Chrome element.

Steel Grit Product Technology

Steel Grit Hardness:

GP steel grit : External form is round and shaped with steel water, owns fine elasticity and the strength of

fatigue resistance as a result of fine heat treatment, applied in all aspects, special hardness steel shot

applied in strengthening treatment.

GL steel grit : Although harder than GP steel grit, GL also loses its sharp edges during shot blasting and is

particularly suited to descaling and surface preparation applications.

GH steel grit : Having maximum hardness, GH always remains angular in its operating mix. These abrasives

are particularly effective in surface treatment processes and produce a uniform, etched finish, GH angular

grit should only be used in wheel machines where working requirements take precedence over cost price

considerations .For use mainly with compressed air blasting equipment.

Steel Grit Test

Steel Grit SGS Report

Steel grit Application

· auto- and manual blasting of metal products (castings, forgings, steel constructions, pipelines);
·
· shot-peening of heavy-loaded parts (shafts, carriage springs, springs, cog-wheels) ;
·
· surface treatment of stone, granite-, marble- and natural stone-cutting;
·
· cleaning of cutting tools;
·
· surface preparation of parts for galvanic coatings, enameling;
·
· surface preparation of oil and gas pipelines for multi-layer coatings;
·
· cleaning of oil-storages and reservoirs
Stone/ marble/ granite cutting