1,The structure of this equipment is made up of high strength alloy aluminum profile,this machine is especially used for transparent UV,mached with spray and curing system.

2,The control system of this equipment is touch screen man-machine interface with microcomputer,simple operation.Can store 20 sets memory,save a lot of adjusting time for the operator.

3,The main electrical control system is choosed as Schneider electric,Using taiwan dalta converter,Shenghong high pressure fan,which is made in Taiwan.

4,The availability of the painting can be above 97%,saving more than 60% of the painting cost.

5,When the atomised painting is used in the vacuum space,there is no leak,no letting out,this is very enviroment protective and healthy.

6,High pressure blower is controled by frequency conversion control,flexible deployment and can save electric power.

7,The thickness of the film can be adjusted easily,10-100 g/m2 is available.

8,This equipment can spray four surfaces once,and also can choose the surface to be sprayed,it is very available.

9,If the machine choose UV as its paint,the workpiece can be dried in a very short time,only need 1 second,this makes the time for production very short and also saves a lot of the space of the mill. 

10,The configuration for the High-pressure lamps is :up 1+down 1+left 1+right 1.

11,Transport mode:roll+belt

12,Voltage:380V,50HZ

spray system

JX-VC-200

Modle

Drying system

JX-VC-200

Maximum width of the workpiece(mm)

200

Maximum working width(mm)

200

Minimum length of the workpiece(mm)

800

Minimum working length(mm)

800(four surfaces);400(underside surface not sprayed)

Feeding Speed(m/min )

0-30

Working Thickness(mm)

8-70

Blower power(kw)

13(frequency control)

Cooling wind power(kw)

1.5*2

Conveyor power(KW)

0.75

Lamp power(KW)

3*4

Electric power(kw)

6*2

Conveyor power(KW)

0.75

Spray system power(kw)

25.75

Dry system power(kw)

15.75

Total power(kw)

41.5