Fiber Optic Splicing
USD $4,600 - $5,200 /Piece
Min.Order:1 Piece
Jiangsu Unikit Optical Technologies Co., Ltd.
Fiber Optic Splicing
Operation Video:
/watch?v=EmUgU2Vaquc
Splicing | |
---|---|
Alignment | Fixed V-Groove (Clad to Clad) |
Applicable Fibers | SM, MM, DS, NZDS |
Cladding Diameter | 125 µm |
Coating Diameter | 250 µm – 900 µm |
Fiber Cleave Length | 26 – 40 mm |
Typical Average Splice Loss | SM: 0.03 dB, MM: 0.02 dB, DS: 0.06 dB, NZDS: 0.06 dB |
Splicing and heating time (typical) | 7 sec - fusion splicing, 20 sec for sleeves heating (fiber 0.9 mm), 70 sec (fiber 3.0 mm) |
Protection Sleeves | 30 mm (for fiber0.9 mm), 40 mm (in-plant cable 2.0, 3.0 mm) |
Internal Memory | up to 2000 results |
Thermal Stripper | |
Fiber Parameters | fiber diameter 125 µm, coating diameter 250 µm and 900 µm |
Fiber Cleave Length | up to 28 mm |
Heating Time | 1 – 15 sec |
Heating temperature range | from +60 to +150°C |
Stripping Effort | 4 kgs |
Fiber Optic Cleaver | |
Fiber parameters | fiber diameter 125 µm, coating diameter 250 µm and 900 µm |
Cleave Length | 7.5 mm |
Blade lifetime | 48 000 |
Tube Heater | |
Applicable Cable Diameter | for fiber: 250 µm and 900 µm, for in-plant cable: 2.0 mm – 3.0 mm |
Sleeves Length | 32 mm (standard) |
Heating Time | 20 – 35 sec |
Heating temperature range | from +130 to +200°C |
General Characteristics | |
Tension test | 1.96 N |
Operation Conditions | from –10 to +50°C, at RH up to 95% |
Storage Conditions | from –40 to +80°C, at RH up to 95% |
Interface | USB, RCA, ext. power |
Power Supply | lithium-polymer battery / power adapter ~100-240 V |
Battery | 1400 mA/h, 2 pcs. |
Battery splice/heat cycles | 120 cycles (for 0.9 mm fiber) |
Dimensions & Weight | |
W | 135 mm |
D | 200 mm |
H | 82 mm |
Weight | 1.5 kg (with battery) |