Product Details

XYZ Thin Oil Lubrication Station for kinematic viscosity/used oil purifier definition/centrifugal oil cleaners

Technical Parameter>>> Thin Oil Lubrication Station

Model		XYZ -6G	XYZ -10G	XYZ -16G	XYZ -25G	XYZ -40G	XYZ -63G	XYZ -100G	XYZ -125G	XYZ -250G	XYZ -400G	XYZ -630G	XYZ -1000G
Oil Supply Pressure (Mpa)		≤0.6
Nominal Flow Rate (L/min)		6	10	16	25	40	63	100	125	250	400	630	1000
Oil Temperature (°C)		40±3
Oil Tank Volume (m³)		0.15		0.63		1		1.6		6.3	10	16	25
Filtration Precision (mm)		0.08~0.12
Filtering Area (m²)		0.05		0.13		0.19		0.4		0.52	0.83	1.31	2.2
Cooling Water Consumption (m³/h)		0.36	0.6	1	1.5	3.6	5.7	9	11.25	12-22.5	20-36	30-56	60-90
Electric Heater	Power (kw)	2		6		9(12)		12(24)		24	36	45	54
	Voltage (V)	220V /380V (can be customized)
Electromotor	Power (kw)	0.55		1.1		2.2		4		7.5	11	18.5	30
	Rotating Speed (r/min)	1400		1450		1430		2550		970	1460	970	1470
Net Weight (kg)		308	309	628	629	840	842	1260	1262	3980	5418	8750	12096

Application>>> Thin Oil Lubrication Station

This product is suitable for thin oil lubrication systems with the working media of steam turbine oik, 20^#to 25^# machinery oil and rolling oil. The kinematic viscosity level is from N22 to N460 (i.e. ISO VG22 ~ ISO VG460).

The nominal oil supplying pressure of XYZ-G Thin Oil Lubrication Station is 0.4 MPa.

The filtering precision is 0.08 ~ 0.12mm.

The cooling water temperature is ≤ 30 °C.

The cooling water pressure is 0.2 ~ 0.3MPa.

The oil inlet temperature of heat exchanger is 50 °C cooling to 7~8 °C.

The steam turbine pressure is 0.2 ~ 0.4MPa when it is heated by steam.

Characteristics>>> Thin Oil Lubrication Station

1. It is equipped with spare oil pump to ensure continuous oil supplying to lubricating points.

2. The filter is placed in front of the cooler to increase the filter and passing capacity, this is applicable for lubricating medium of higher viscosity as well.

3. It is provided with a double-cylinder type filter cartridges which can be cleaned and replaced without ceasing the machine.

4. It uses a pipe-type oil cooler with a good cooling performance, little resistance and convenient maintenance.

5. Returned oil is filtered by a magnetic screen which can clear iron particles by absorbing to ensure the cleanness of the oil and prolong service life for the lubricated parts.

6. It is provided with an instrument board and electric control Cabinet for a convenient

observation. Also, it can realize automatic control and accident alarm.

Photos View>>> Thin Oil Lubrication Station