Product Details

High precion and low price CIT-2 High precision common rail test bench

The characteristics,

1, the main technical data common rail injector single injection by the French EFS measured;
2, adjustable injector fuel injection frequency, pulse width adjustable;
3, the trigger pulse, hold pulse between 0 and 5 ms is adjustable;
4, the amount of oil per cycle can automatically identify, display;
5, back to the oil can automatically measure, display;
6, the main motor for the import of special inverter;
7, the electrical system PLC control;
8, special damping cast-iron table, cast iron chassis;
9, all enclosed operating room, automatically open the door;
10, pneumatic quick clamp, imported linear guide base;
11, High-profile CIT-2 High precision common rail test bench aluminum industrial profiles framework, overall nice.

o; word-spacing: 0px; -webkit-text-stroke-width: 0px;">

The functions

1, High precion and low price CIT-2 High precision common rail test bench testing common rail injectors

Measurable at most 6 brand solenoid valve injectors

High voltage, such as Bosch, denso injectors

low voltage ,such as Delphi injector mixer

2. CIT-2 High precision and high pressure common rail test bench can test Siemens, Bosch, piezoelectric crystal (PIEZO) fuel injector

3. all channel electromagnetic valve and piezoelectric crystal drive have short circuit protection function, will not harm for the injector and the tester itself

4, can provide standard test procedures and conditions, the standard oil/oil return amount data, synchronous display. Customised operating mode, the user can also be very convenient to add or change the experimental data, the system with more than 400 standard data (and) in the add, convenient for user maintenance injector.

5,testing common rail pump

1, multi-channel PWM (pulse width modulation) signal output is used to drive various pump;

(1) CIT-2 High precision and high pressure common rail test bench single channel regulation of the oil pump drive signal

Bosch CP1 / CP2 /CP3

Delphi CRSP

denso HP3 / HP4

The technical parameters

maximum output power	11 kW
speed range	50 to 4000 rev / min
imported encoder, digital shaft angle 0 ~ 360 °	angle encoder 3600 pulses / rev
spindle rectangular tooth plate (single rectangular tooth)	2-speed gear tooth plate 96-6 rectangular plate
amount of fuel oil supplying system	≥ 16 L / min
fuel system supply pressure	low pressure ≥ 0.4 MPa high pressure ≥ 4.0 MPa
amount of oil lubrication oil	≥ 6 L / min
lubrication oil pressure	0 ~ 0.4 MPa
fuel control temperature	40 ± 2 °C
pressure regulato	0 to 0.6 MPa (external gas source)
dimensions (length × width × height)	2122 × 820 × 2078 (mm)
weight	1850kg

our workshop

our transportion

contact ways :