CW6280B Lathes / heavy duty horizontal lathe / Low Lathes
USD $10,000 - $25,000 /Set
Min.Order:1 Set
Taian Haishu Machinery Co., Ltd.
chuck lathe CW61125 large lathe machine/china factory machine
china factory machine CW61100 heavy duty machine and gap bed lathes
china factory machine CW6132/CW6136 conventional lathe and gap bed lathes
china factory machine CW62100 gap bed lathes and conventional lathe
conventional lathe machine tools CW61100 hobby metal lathe and large machine
CW6280B
Common (Saddle) Lathes
This lathe is mainly used for turning face, cylindrical bore, tapered surface, and other rotating body parts, process various commonly used metric, inch, module and pitch threads, and can bear drilling, nesting, boring and other technology.
Structural features:
1.Bed with large double width sidewall ribs, the inner ribs and diagonal ribs with box-shaped composite structure, the overall stiffness than the single-walled door-shaped rib structure to improve third.
2.Centralized control, slide plate has a fast moving body with single handle visualize manipulation; spindle reversing conversion and brake hydraulic control.
3.Lathe structural stiffness and transmission stiffness were higher accuracy and stability, and can carry heavy cutting.
4.Bed rail down surface using TSF wear inlay layer structure, motion light and flexible, long life; lubrication system for the circulation outside the box to improve the machining accuracy.
5.Spindle hole 105mm (C type is 130mm); processing length is 1500mm, 2000mm, 3000mm, 5000mm and so on. Tailstock with dials and engraved lines, using an intuitive; Overall neat appearance, easy to clean and maintain.
Main technical parameters
Item | Unit | Parameters |
Maximum workpiece swing diameter over bed | mm | 800 |
Maximum workpiece length | mm | 1500 |
Maximum workpiece swing diameter over carriage | mm | 480 |
Turning diameter in the saddle | mm | 1100 |
Effective width In the saddle | mm | 310 |
Spindle bore diameter | mm | φ105 |
Spindle head form | D11 | |
Front spindle taper hole diameter | mm | φ120 |
Front spindle Taper | MT No.5# | |
Spindle speeds Progression | 18 | |
Spindle speed range | r/min | 5.4~720 |
Infeed amount | 1/2 | |
Longitudinal feed progression and scope | mm/r | 64kinds,0.06-24.3; Range :0.1-1.52(1:1);1.6-24.3(16:1) |
With a range of micro feed change gears | mm/r | 0.06-0.912 |
On turret maximum stroke | mm | 200 |
Below turret maximum stroke | mm | 450 |
Taper of tailstock sleeve | kw | MT No.5# |
Tailstock sleeve maximum stroke | mm | 250 |
Saddle rapid traverse | mm/min | 4000 |
Machine screw pitch | mm | 12mm( Metric);1/2”( Inch) |
Processing Metric thread range and kinds | mm | 50kinds,1-240( Another 14 kinds of non-standard thread) |
Processing Inch thread range and kinds | Teeth / inch | 26 kinds,14-1 |
Module thread range and kinds | mm | 53 kinds,0.5-120 |
Processing thread pitch range and kinds | DP | 24 kinds,28-1 |
Bed rail width | mm | 600 |
Bed rail hardness | RC | RC52 |
Main motor power | kw | 11 |
Fast motor power | kw | 1.1 |
Coolant pump motor power | kw | 0.09 |
Machine weight | kg | 4000 |
Overall dimensions (L×W×H) | mm | 3500×1500×1630 |
Maximum loading | kg | 2000 |