Name: High quality coffee capsule aluminum foil lid/aluminum foil lid for K-Cup coffee cup
Brand: ZHENGHUI
Availability: InStock

Product Details

coffee capsule aluminum foil lid/aluminum foil lid for K-Cup coffee cup

Zhenghui Printing&Packing Industrial Co.,ltd suply all kinds of coffee capsule aluminum foil lid/aluminum foil lid for K-Cup coffee cup ,non printing or colored printing foil,the detailed information is as follows:

1.Temper,Alloy: 8011O,H18

Thickness:0.020mm-0.050mm(before coating).

Width: 10-1000mm(according to your requirement)

Core Inner diameter:76mm

Aluminum foil lacquered one side ready for printing, and the other side with heat seal-able lacquer/HSL

2.Structure: HSL/Alu foil/Primer(printable)

HSL/Alu foil/Paper/primer

3.Heat seal material:PS,PP,PVC,PET,PE ETC

4.Technical data: coffee capsule aluminum foil lid/aluminum foil lid for K-Cup coffee cup

Appearance	Clear;smooth;uniform coating,no more than 3 joint-points each 1000m,marked each joint-point,surface&side entangles tightly and neat. Tower-shaped, staggered &core falling free & severe damage are forbidden.
Width Deviation	±0.5mm
Thickness Deviation	±0.003mm
Pinhole	There are no dense, continual ,periodic pinhole. There are no pinhole with d≥0.3mm in 1m². The pinhole with d=0.1-0.3mm≤1 in 1m².
Printing Quality	The letter and design is correct,clear,fastness, non-fade in high-temperature heat seal process.
Printing Quality	Overprint precision ±0.5mm
Protecting Layer	Non-desquamation by adhesive tape test
Difference of Coated Volume of Adhesive Layer	≤±10%
Heat seal Strength of Adhesive Layer (N/15mm)	≥7
Rupture Strength(KPa)	≥98
Performance of Opening the Roll	Protecting layer& Adhesive layer are not agglutinate

4.Packing: for coffee capsule aluminum foil lid/aluminum foil lid for K-Cup coffee cup ,Each roll will be packed in PP protection film,4 rolls in a carton .

5.Delivery time:for coffee capsule aluminum foil lid/aluminum foil lid for K-Cup coffee cup ,15-20days

Production Process:

Our Machine:

Packaging & Shipping

FAQ

1.What is the material of the bottle& cups ? Such as:PP/PE/PET,etc.

2.What is the diameter of the aluminum foil lids?

3.What is the thickness of the aluminum foil lids?

4.Whether easy to tear up?

5.Whether your product need to be printed?

6.The quantity you need?

7.What is our payment ways?