Product Details

cigarette pack

1.Introduction:

Tobacco foil used as inner packaging of cigarette packs is formed by two-layer laminate made by means of the technology of backing the aluminium foil with paper using dispersion starch-based adhesive. Aluminium foils with a thickness of 0.006 to 0.0100 mm are used. Paper, with a basis weight in the range of 25 to 50 g/m2, is mill finished either on one side or on both sides. The entire surface of the foil is coated with a layer of special sliding varnish ensuring good workability on high-speed machines. Varnish can be either clear or of a specified colour and shade. The laminate can be further aesthetically finished by the embossed printing in our plant or on the packing machines in the course of cigarettes, Tobacco or Gutkha packing.

1.Specification:

Appearance	Clear; smooth; uniform coating, no more than 3 joint-points each 1000m, marked each joint-point, surface &side entangles tightly and neat. Tower-shaped, staggered &core falling free & severe damage are forbidden.
Width	10-1200mm
Thickness	0.0065mmalu+30-40gpaper+Food grade glue
Material	Aluminium foil, paperand glue
Printing	1-6colors printing

2.Techinacal data:

Appearance	Clear; smooth; uniform coating, no more than 3 joint-points each 1000m,marked each joint-point, surface & side entangles tightly and neat. Tower-shaped, staggered &core falling free & severe damage are forbidden.
Width Deviation	±0.5mm
Thickness Deviation	±0.003mm
Printing Quality	The letter and design is correct, clear, fastness, non-fade in high-temperature heat seal process.
Printing Quality	Overprint precision ±0.5mm

3..Packing:4rolls in a carton,each roll will be protected by a pp film.

4.Usage: used for cigarette foil

5.Delivery time:25-30days

Our Machine

Our packing: