YI-LIFT hydraulic jacks for repairs, maintenance and installation of heavy machines
- Compact and stable construction.
- Can be used in any position.
- Housing revolves 360 degrees.
- Lowering speed can be accurately adjusted.
- Protected against overloading.
- Pump lever is removable.
- According to CE and US standard USA ASME/ANSI B30.1.1986.
CAUTIONS
To avoid possible personal injury or damage to equipment - Do not exceed the maximum load capacity of the jack.
- Do not add additional load to a lifted load.
- Do not use in unstable or hazardous positions.
- Unit must be used on flat surfaces able to carry the load.
- The load must be stable during lifting.
- An unstable load may cause the jack or load to slip.
- Do not use jack(s) if damaged, altered or in poor condition.
- Do not lift people or loads with people on them.
- Do not lift at the end of the toe. Fully engage the load with the toe.
Type |
| HM50 | HM100 | HM250 |
Capacity | (tonne) | 5 | 10 | 25 |
Lifting Range of Foot | (mm) | 25-230 | 30-260 | 58-273 |
Lifting Range of Head | (mm) | 368-573 | 420-650 | 505-720 |
Max. Lever Force | (kg) | 38 | 40 | 40 |
Net Weight | (kg) | 25 | 35 | 102 |
Note: Specification and materials are subject to change without notice.