Name: 30M communication pole monopole cell towers for manufacture Made In China
Brand: FUTAO
Availability: InStock

Product Details

30M communication pole monopole cell towers for manufacture Made In China

Company Information

Yixing Futao Metal Structural Unit Co. Ltd is located in No.8 Nanxin East Road, Heqiao Town, Yixing City, Jiangsu Province.Equipped with a series of numerical control conveyor systems of flattening, cutting, folding and auto-welding, we could manufacture high & medium mast lighting, road lighting power poles, sight lamps, courtyard lamps, lawn lamps, traffic signal poles, monitor poles, microwave communication poles etc.Moreover,Our manufacturing process has been ISO9001 certified.Therefore,we own a large-sized numerical control hydraulic pressure folding machine with once folding length 13,000mm and the thickness 2-20mm.

we have been honored with the title of the AAA grade certificate of goodwill".In 2015 we have owned 27 Transactions for more than US $1,300,000 in the latest 12 months.

All of our material are purchased from famous factory to assure the high quality.

Product Description

Type	30M 50M communication pole monopole cell towers for manufacture Made In China
Suit for	communication accessories
Shape	,Multi-pyramidal,Columniform,polygonal or conical
Material	Normally Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52-
Torlance of dimenstion	+- 1%
Power	10 KV ~550 KV
Safety Factor	Safety factor for conducting wine : 8
Design Load in Kg	300~ 1000 Kg appliced to 50cm from the to pole
Marks	Name palte through rivert or glue ,engrave ,emboss as per customers requirements
Surface treatment	Hot dip galvanized Following ASTM A123, color polyester power or any other standard by clients required.
Joint of Poles	Insert mode ,inner flange mode ,face to face joint mode .
Design of pole	Against earthquake of 8 grade
Wind Speed	160 Km/Hour . 30 m /s
Minimum yield strength	355 mpa
Minimum ultimate tensile strength	490 mpa
Max ultimate tensile strength	620 mpa
Standard	ISO 9001
Length of per section	Within 14m once forming without slip joint
Welding	We has past flaw testing.Internal and external double welding makes the welding beautiful in shape Welding Standard :AWS ( American Welding Society ) D 1.1
Thickness	2 mm to 30 mm
Production Process	material checking → Cutting →Molding or bending →Welidng (longitudinal )→Dimension verify→Flange welding →Hole drilling →Calibration → Deburr→Galvanization or powder coating ,painting →Recalibration →Thread →Packages
Packages	Our poles as usual are covered by Mat or straw bale at the top and bottom ,anyway we can also follow clients required , each 40HC or OT can load pieces according to calculation which bases on the clients’ actual specification and data.

1.A factory certificate issued by the factory with stamp and signature must be provided before unloading the material in our

factory , otherwise we have rights to refuse.

2.Before put into production , all the material must be passed the chemical and physical analysis to make sure that they have

met the requested strength and component.

Inspection

To assure our products qualified , we take steps as follows :

1. Management team : We have employed the experienced senior experts to take charge of the whole management ,

especially the technical management and quality management .

2.Introducing ISO management :We are aware of ISO 9001:2008 certificate .

3.QC Inspection :It is our company policy that all the finished products should be inspected by our specialized QC in every

manufacture step and before each shipment.

Design and Detail

Lofting and designing software :We have transmission power pole designing software which can help us design all kinds of steel poles ,at the same time ,the TMA and LMA are adopted by us to design the drawing accurately

Packaging & Shipping

Our 30M communication pole monopole cell towers as normal are covered by Mat or straw bale at the top and bottom and woods between the poles can avoid the damage of the galvanization on the surface of steel poles, anyway also we can follow clients required , The loading capacity of 40HC or OT will be calculated basing on the clients’ actual specification and data.

FAQ

1. Price Term: FOB, CFR or CIF.

The price includes pole shaft, based plate, cross arm and anchor part.

Shipping seaport: Shanghai Seaport. For FOB, CFR or CIF price, please specify which exact model you need, then tell us quantity of your order so that we can calculate the local transport charge and sea freight.

2. MOQ: 1 set for Customized

3. Payment: Typically 30% by T/T as a deposit, balance by T/T or L/C at sight before shipment. Other payment way can be negotiated.

4. Delivery time : goods can be ready for shipment within 10 workdays after receiving deposit.

5 Warranty : 30 years

6.Surface treatment :hot dip galvanization

Application: communication

Our Services

1. Reply your inquiry in 24 working hours.

2. Experienced staffs answer all your questions in fluent English.

3. Customized design is available. UEM&UBM are welcomed.

4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staff.

5. Special discount and protection of sales are provided to our distributor.

6. Professional factory : We are manufacturer, specializing in producing all kinds of steel poles for more than 20 years, competitive with good quantity.

7 Sample: We can send out sample for test in one week if the order quantity is big enough. But the shipment charges is usually paid by your side, the charges will be rebounded when we have formal order.

8. As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature. Welcome to contact us or visit our company.