Specifications

Open Rubber Mixing Mill
pact structure/high intensity
2.low noise/high resistance
3.driving gear
4.chast iron roller

  New Two Rolls  open rubber refining mill /Mixing Mill

 

A) Rolls :Alloy Chilled Cast Iron rolls with surface hardness 510 ~ 550 BHN. The Rolls are mirror finished & polished, duly grinded and are hollowed for cooling or heating

 

B) Roll Clearance Adjusting Unit : Through worm and worm gear drive clutch rod for Parallel sheeting hand wheels to close the NIP from One point only

 

C) Roll Cooling :Universal Rotary joints with inner Spray pipes with Hoses and Headers. Piping is complete up to supply pipe terminal.

D) Journal Bearing Housing :Heavy Duty Steel Casting Housing fitted with Anti Friction Roller Bearings

 

E) Lubrication : Manual / Motorized Grease lubrication pump for Anti Friction Roller Bearings fitted in dust sealed housing.

F) Stand Frame & Apron (Cap) :Heavy Duty Steel Casting.

G) Gearbox :Helical Reduction Gearbox Greaves/ Shanti make direct coupled with Rear roll and Motor

 

H) Base Frame :Common base frame heavy duty, Steel Beams and MS plate fabricated accurately machined on which whole machine with Gearbox and motor are fitted. No deep foundation required

 

I) Electric Control Panel :Star Delta Electric operating panel with Auto Reversing, Voltmeter, Ampere, Overload protection relay, 3 Phase Indicator and Emergency Stop Switch.

  Version and its Technique Parameters:

  

 

Technique Parameters	XK-160	XK-250	XK-400A	XK-450A	Xk-450	XK-560A	XK-550B	XK-660	XKY-660
Roll diameter(mm)	160	250	400	450	450	560/510	550	660	660
Roll length(mm)	320	620	1000	1200	1200	1530	1500	2130	2130
Front roll surface speed(m/min)	8.95	15.3	18.65	18.65	23.47	27.87	28.32	28.6	32.53
Friction ratio	1:1.35	1:1.1	1:1.27	1:1.27	1:1.27	1:1.2	1:1.22	1:1.24	1:1.09
Max.nip	4.5	8	10	15	15	15	15	15	15
Feeding capacity per	1-2	10-15	18-35	25-50	25-50	35-50	50-60	165	165
Power	5.5	18.5	37	55	55	90	110	160/245	160/245
Size(lenght*width*height)(mm)	1226*830*1295	3400*1600*1500	4350*1850*1780	5200*2380*1940	5670*2390*1670	6180*2280*1970	5870*2470*2040	7460*3660*2080	7465*3660*2080
Weight(Kg)	1280	3300	7860	12600	11940	22500	27000	49940	49000

 

 

Picture one : XK-160 lab rubber mixing mill . Mainly used for lab use

 

 

 

 

 

picture two : XK-250 rubber mixing mill . production capacity is about 150 kg/h

 

 

picture three : xk-360 rubber mixing mill .Production is about 250 kg/h

 

 

 

picture four : xk-400 rubber mixing duction is about 350 kg/h . From this model , we begin distiguish configuration . NYLON , COPPER , ROLLER BALL BEARING.

 

 

 

picture five:XK-450 rubber mixing mill . two configuration , stock blender is choosed . 500 kg/h

 

 

 

picture six : XK-560 . two configuration , stock blender . production is 500 KG/H

 

picture eight : XK-660 rubber mixing mill . production capacity 2000 kg/h

 

Brief Introduction of our factory:

Qingdao Yahua Machinery Co.,Ltd is situated west of Jiaozhou and east of Qingdao Economic Developing Zone, near No.,204 National Road and Tongsan High Way.

We are very professional rubber machinery factories here. OUr products are well-known from different areas in domestic and overseas.

Our slogan is: Quality makes survive. Technology makes develop. Good service deserves good reputation. Good results deserves good organization. We are keeping on working hard and develop better products.  Looking forward our long friendly cooperation with people from all of the world.

 

Contact Person: Bella

 

Office Phone:  0532-83132191/85165781 

 

Fax Phone:  0532-83137817/85165781

 

Mobile phone:13325017346