Specifications

Rubber Sheeting Mill Machine
1.Built-in heater
2.electric heating and cooling system
3.Taiwang gear motor

  rubber mixing machinery

 

Introduction:

 

 

Rubber Sheeting Mill machine is chiefly used as accessory of internal mixers to make rubber sheets.

 

The rollers are made of chilled cast iron with vanadium and titanium alloys. The roller face is hard and anti-wear. The internal cavity is processed to make temperature well proportioned on the roll surface.

 

The machine is equipped with an overload protection device to prevent the major components from being damaged due to overloading.

 

The machine is also equipped with an emergency device. When an emergency accident happens, just draw the pull rod, and the machine will stop immediately. It is safe and reliable.

 

The transmission system adopts a hard facing gear reducer, which has a compacted structure with higher transmission effciency, lower noise and longer service life.

 

The base frame is a complete framework, which is convenient for installation.

 

 

Version and its Technique Parameters:

 

Technique Parameters	XK-160	XK-250	XK-400A	XK-450A	Xk-450	XK-560A	XK-550B	XK-660	XKY-660
Roll diameter(mm)	160	250	400	450	450	560/510	550	660	660
Roll length(mm)	320	620	1000	1200	1200	1530	1500	2130	2130
Front roll surface speed(m/min)	8.95	15.3	18.65	18.65	23.47	27.87	28.32	28.6	32.53
Friction ratio	1:1.35	1:1.1	1:1.27	1:1.27	1:1.27	1:1.2	1:1.22	1:1.24	1:1.09
Max.nip	4.5	8	10	15	15	15	15	15	15
Feeding capacity per	1-2	10-15	18-35	25-50	25-50	35-50	50-60	165	165
Power	5.5	18.5	37	55	55	90	110	160/245	160/245
Size(lenght*width*height)(mm)	1226*830*1295	3400*1600*1500	4350*1850*1780	5200*2380*1940	5670*2390*1670	6180*2280*1970	5870*2470*2040	7460*3660*2080	7465*3660*2080
Weight(Kg)	1280	3300	7860	12600	11940	22500	27000	49940	49000

 

Contact Person: Bella

Office phone: 0532-83132191/83137817

Office fax: 0532-83137817/83137817

Mobile phone: 13325017346