Product Details

Specifications

Rubber Vulcanizing Press
Mainly used for the clampdown of all kinds of rubber ,
Without oil spilling,
Low noise

Manual Push-Pull Mode Vulcanizer

The machine is the pillar type structure, mainly by the host, hydraulic pressure station, electric control into. Host a next base, plunger, activity platform, beam in, automatic push mould device, forced open mold device etc parts. The beams, activity platform and the hot plate respectively between equipped with high quality insulation board, prevent the hot plate heat transfer to activities platform, cause of working liquid temperature increases. The machine can automatically forced open mold, automatic launch mould, and other functions, in PC control can be done automatically shut the mould, vulcanization timing and exhaust in time and frequency setting, mould opening, pushing mould and so on work cycle, and set the manual control condition, is rubber vulcanization products advanced and reliable automation equipment.

Model and its Parameter as follows:

Model XLB-D	6506501	7007002	8008001	110011001	130010001
Plate Size(mm)	650*650	700*700	800*800	1100*1100	1300*1000
Working Layer	1	2	1	1	1
Total Pressure(MN)	1.00	1.00	1.00	1.00	1.00
Plunger Stroke(mm)	300	300	300	400	200
Layer Distance(mm)	300	150	300	400	200
Plate Unit Pressure(Mpa)	2.4	2.0	1.6	0.83	0.77
Plunger Diameter(mm)	300	300	300	300	300
Total Heating Power(KW)	10.8	15.3	9.6		30
Heating Type	Electricity	Electricity	Electricity	Electricity	Electricity
Max.Temperature	200°C	200°C	200°C	200°C	200°C
Configuration Type	Pillar	Frame	Frame	Frame	Pillar
Motor Power	2.2KW, 940r/min	2.2KW, 940r/min	2.2KW, 940r/min	6-2.2KW,940/min	2.2KW, 940r/min
Pressure of Working Fluid(Mpa)	14.1	14.1	14.1	14.2	14.2

Contact Person: Bella Xue

Office phone: 0532-83132191

Office Fax: 0532-83132191