Specifications

1Door mat making machine
2'Mainly used for vulcanizing various of rubber products and non-model products
3. ISOcertificate

 

Rubber molding press; Hydraulic Molding Machine; hydraulic press; plate press, compression press; plate vulcanizing machine,vulcanizer. 

 

 

Main usage:

 

 

 

1, The frame type plate vulcanizer applies to vulcanize all kinds of rubber and plastic mould products as well as non-mould products.

 

 

 

2,  Applicable line:Rubber Sheet, Oil Seal,O Ring,Gasket, Engine Mountings,Hardware Rubber, Molded Rubber Parts and etc. 

 

 

 

Characteristic:

 

 

 

1.This vulcanizing machine is used for all kinds of vulcanizing mould, rubber and plastic mould products, and non-mould products.

 

2. The machine is in frame structure with below pressing form (upwards). Under the working hydraulic pressure, the embolism ascends to make hot plate close for getting pressure, while the embolism descends (namely hot plate turning on) by deadweight of hot plate, platform and embolism to drive working fluid to fuel reserve tank to achieve the aim of descending (namely turning on).

 

3. Made of nodular cast iron, the oil cylinder of machine is improved in compressive strength and wear resistance. Seal ring made of oil-proof rubber is placed in oil cylinder to have sealing effect in working process of this machine.

 

Combined oil pump, power source of the machine, provides working fluid with certain pressure. Working fluid enters into oil cylinder by control valve to make control handle on control valve turn to different places, and then embolism is able to ascend or descend.

 

4. Adopting tubular electric-heating component to heat up, the machine can reduce air pollution to keep workshop clean without boiler.

 

5.The machine is beautiful in shape, rational in structure, convenient in control, safe and credible as well.

 

 

Parameter:

 

 

Model XLB-D	400*400*2	500*500*2	500*600*2	450*450*4	400*400*2	400*500*1	300*300*2	350*350*1
Nominal Mold Force(MN)	0.80	0.80	0.80	0.63	0.50	0.50	0.25	0.25
Plate Specification(mm)	400*400	500*500	500*600	450*450	400*400	400*500	300*300	350*350
Working Layer Number	2	2	2	4	2	1	2	1
Plunger Stroke(mm)	250	300	250	250	300	300	250	250
Plate Unit Pressure(Mpa)	5.0	3.2	2.7	3.1	3.1	2.5	2.8	2.1
Plate Distance(mm)	125	150	125-200	62.5	150-250	300	125	125
Plunger Diameter(mm)	250	250	250		200	200	152	152
Working Fluid Pressure( Mpa)	16.2	16.2	16.2	12.8	16	16	13.8	13.8
Total Heating Power	9	9	10.8	15.0	9	7.2	7.2	4.8
Heating Type	Electricity	Electricity	Electricity	Electricity	Electricity	Electricity	Electricity	Electricity
Highest Temperature	200°C	200°C	200°C	200	200	200	200	200
Structure Form	Pillar	Pillar	Pillar	Four Column	Four Column	Four Column	Four Column	Four Column
Motor Power	1.5KW,940r/min	1.5KW,940r/min	2.2KW,1420r/min	2.2KW,1400r/min	2.2KW,1430r/min	2.2KW,1430r/min	2.2KW, 1420r/min	2.2KW, 1420r/min
Dimension(length*width*height)	1300×650×1400	1300×1400×650	1400×700×1600	1325*650*1670	1300×580×1900	1300×600×1545		1300*400*1400

 

 

Type	XLB-DQ1200×1200×2	XLB-DQ1300×2000×1	XLB-Q1200×2500×1	XLB-Q1500×2000×1	XLB-Q2000×3000×1	XLB-Q1400×5700×1
Total pressure(MN)	315t	560t	750t	1000t	1800t	2800t
Platen size(mm)	1200×1200	1300×2000	1200×2500	1500×2500	2000×3000	1400×5700
Daylight (mm)	200	400	400	400	400	400
No of Daylights	2	1	1	1	1	1
Piston stroke(mm)	400	400	400	400	400	400
Plate Unit Area pressure(kg/cm2)	22	21.5	25	33.5	30	35
Main motor power(kw)	3	8	9.5	11	26	43.5
Overall dimension(L×W×H) (mm)	1685×1320×2450	2000×1860×2500	2560×1700×2780	2810×1550×3325	2900×3200×2860	2400×5800×3600
Weight(kg)	9500	17000	20000	24000	66000	110000

 

 

 

 

Above is only part of our standard technical parameter, we also can manufacture non-standard product according to customer's specific request.