foot line marble

 Compound marble is combine two kinds or more panels. The surface material is natural marble, the basic material is tile,glass or aluminum honeycomb and so on.

 1.LIGHT

  The thinnest of composite stone is 5mm(composite wiht Aluminum Honeycomb Panel),and the normal product is 12mm,which could rduce the carrying load and is the best choice for that weight limit.

  2.HIGH STRENGTH

  More than five times stronger than nature marble.Good bond stength which can greatly reduce wastage.

  3.IMPROVING ANTI-POLLUTION ABILITY

  Nature marble is easy to be efforescence and yellow,but composite stone can avoid those conditions greatly.

  4.EASY TO CONTROL THE COLOR

  Because of cuttig into more thin pieces of marble,that can achieve consistency of color and pattern.

  5.CONVENIENT INSTALLATION

  Clean and ceramic tile maintenance and storage are similar,simple and convenienct. It can be used for wall hanging,and also firectly attached to walls or floor.

  6.REDUCE INSTALLATION COST

  Due to the above advantages,not only increase the installation efficiency,but also reduce installation cost.

  7.EXPAND SCOPE OF APPLICATION

  High strength,different size and color which could expand its scope of application.

  8.ENVIRONMENTAL PROTECTION

  Composite stone structure greatly reduces the radioactive cotamination.

marble floor patterns square Porduct application:

 foot line marble

   foot line marble

    oot line marbl

1.It is normal that ordered goods are different from the samples.Because marble is the natrue of product,which texture and pattern is unique of feature.

2.It is normal phenomena there is an impurity,tiny cracks,crystal glasses on stone surface.That will not affect beautiful by mending measures in the whole manufacturing process.

 3.That color deviation in nature marble can't be avoided.In order to reach the best paving results,it's necessary to place all products before paving and confirm the position for each tile.

 4.For improving stones' brightness and gapless,crystal care and filling the gap are done after paving.

More information please feel free to contact the shop staffs.

 foot line marb

    foot line marble

Q1, How is the hope team stone quality?

A:

Raw materials and the production process is the most important factor in determining the quality of products, each batch of material from the director of our company are carefully selected to be mine, selection of raw materials and stable, textures suitable stone; composite ceramic blanks at the end of production in Foshan, Guangdong, each wipes adobe undergo a rigorous inspection of brick hardness, water absorption, flatness has strict requirements. We Heights, founded in 2004, nine years, we have been focused composite marble design and development, adhere to the "luxury fitness doctrine" design philosophy, praised by numerous customers, forming a good brand. From the design perspective, Heights stone, natural marble and tile clever combination of scientific production lines refined, both have the texture of real stone, marble and overcome their own shortcomings to meet the people on the extreme decoration and high taste of life aspirations.

Q2, How about the resistance to staining of MONO's marble?

A:

Compound marble usually compound 3mm marble and tile. Compound marble's surface through the crystal surface nursing and avoid the pollution. Tile completely not absorbs water and if you do the waterproof when tiling, it is not easy to appear the rewet phenomenon.

Q3,What's the difference between your products and others?

A:

(Material)Material and productive technology is the most important factor to affect the product quality. Every group of our material are picked up from the mine by our director so that it can insure the high quality material. The tiles for compounding are produced in Foshan,China and receive the rigorously tested. We have rigorously requirement with the tiles' strength,hygroscopicity and flatness.

·(product system)We established in 2004 and now has formed a complete production system after 9 year's development and update. Our product can absolutely adapt to all needs of all kinds of family design and fixture, no matter from panel to all kinds series,skirting board to clapboard and from border to backdrop.

 Q4, Is it any color difference after tiling your products?

A:

Marble is the natural product. There has no the same marble and every piece's color and texture are different. Even the same quarry stone, it cannot promise the same color and texture between two parts. The unique texture and color is the key value of a marble as it has stronger decorated effect and art appeal. About all, our product will have the color different after tiling and we suggest previewing once time before tiling in order to reduce the color different.

Q5, What's the different between Diana and count?

A:

From the producing area, Diana yellow is belong to Turkey and Count yellow is belong to Island Iran. From the color, Diana yellow is a little fair and cold, and Count yellow is a little yellowish and warm. From the texture, Diana yellow's surface has yellow and white lines and the board scrappy. Count yellow has a little grey root but the board is more pure.

Q7, the white panel would appear yellowing? How to prevent and processing?

A:

White marble has Fe so it would turn yellow when it exposed in the air. All of the white panel would appear this phenomenon. To prevent the white marble yellowed, we need to pay more attention in the machining, tiling and maintenance, so the cost is higher. Before tiling the white marble, we should use the waterproof agent to blockade the surface and nursing the crystal surface regularity. We can process it with the rust cleaning agent when it turns yellow but it can fully disappear.

Daily care

(1)Clear the surface every day :wipe off the dust by mopping

(2) Clear the blemish surface: If marble was contaminated by oil soil like heavy oil and engine oil, use Neutral cleaner like Dishwashing Liquid to scrubbing the stains. Mopping the marble with clean water after scrubbing.

(3)Surface water spots cleaning: Due to the high irrefrangibility processed surface, a layer of water spots will be created after mopping. It can be erase by scraping the water with rubber scrape.

(4)Notes:

   1) In order to avoid damage, keep marble away from acid and alkali etc of strongly corrosive liquid.

   2) Do not use grinding machine and steel wool to polish the marble.

   3) Please repair the marble with professional nursing care when the marble is in badly damaged situation.

   4) We suggest you do professional nursing care for the marble every 1 to 3 months.