Plastic injection mould for white plastic household fan front housing
Specifications
1.Product name: plastic injection mould for white plastic household fan front housing
2.Grade:C
3.Save mold cost: 30%,
4.Sample free
5.Mold lifte:200,000~300,000 shots
6.Mold check: by QC checked before shipping, whith the sample report
Product detail Picture
| 2D drawing soft | Autocad |
2D drawing format | dwg,dxf, pdf |
| 3D drawing soft | Pro-e, UG, Solidwork, MasterCAM,Catia |
| 3D drawing format | igs,iges,stp,step,sldprt,etc |
| Mold base standard | LKM,HASCO,DME |
| Companets standard | LKM, HASCO,DME,DADIO, Robordin |
| Mold steel | P20,718,738,H13,1.2312,1.2344,8407,SKD61,Nak80,S136, etc |
| Hot Runner Brand | YUDO, Mold Master, Mastip, DME, Thermplay,Gunter,Hot tip, |
| Mold Surface treadment | MT texture, YS texture, VDI texture, Polish, Mirror Polish, plating etc, |
| Mold Size | 150*150mm<mold size<1500*1500mm(lessthan 15Ton) |
| Mold Life | 10,000 shots<mold cycle life<5,000,000 shots |
| Shipping method | Express, by air, by sea. |
Founded in 2010, Shenzhen WT hardware and plastics Limited takes pride in meeting and exceeding in customer requirements, WT is located in Shenzhen where is Chinese mold manufacturing center with the best quality and mold technology.
We WT are professional in molds and moldings products, we also support structure design and offer assistance in material selection. you are welcome to see WT mold as an extension of your R&D department, and arem of your design group and manufacturing partner.
We WT has been striving to excellent quality at competitive price, "Quality and Service First", the principle that we pursue, is exactly why we have established business relationships with customers from all over the world. More than 80% of our molds are exported to USA, EU, CIS, South America and other Asia.
To confirm the mold structure correct and can be running smoothly after delivery to customer,
1, The mold design should be check by customer and our high grade engineer
2. We check the mold part in the machining process to ensure the structure and dimension correct,
3. After the mold finish, we should check the sample to confirm the molding part is correct according the drawings, and also make the sample inspect report,
4.and after the mold finish, we also check the mold feature(such as locating, seal of coold water line,connect block, slide,lifts and ejector pins running smoothly,
Above QC work to confirm the mold can be running smoothly after shipping to the customer factory, and every work process can be traced back If necessary.
How to get satisfied quotation quickly from us?
When you want to ask for mold price and unit part price, please do as these three steps.
1) Please try to tell us which grade would you want according to following form:
| A Grade | B Grade | C Grade | D Grade | |
| Mold baseStandard | HASCO/DME | LKM | LKM | Chinese Local |
| Cavity steel | H13,2344,2343,8407 Heat Hard steel | 718, 738, P20HH, NAK80 | Local P20, WY718 | Alunimun, S50C |
| Standard | HASCO, DME | LKM | Chinese Local | / |
| Mold life | >500,000~3000,000 | 300,000~500,000 | 100,000~300,000 | >10000 or only for prototype |
| Runner | Hot runner, cold runner | Hot runner, cold runner | Cold runner | Cold runner |
| Mold price | Most expensive | Expensive | Cost-effective | Cheapest |
2) Tell us: Do you want mold only or want mold and plastic product?
3) Tell us: Plastic type and QTY you want?
4) Send us the product drawing (or sample, or pictures with ruler ) then.
5) Feel free to contact Henry point the blow picture: