Specifications

hight precision,stable,the rotation core with the cooling system

 

 

Hydraulic motor for unscrew in cap mold,In the the cavity side, cancel stripper, use braces, when opening mold by hydraulic motor drive, the spindle, again through the sprocket gear drive time on spindle shaft of the gear rotating, secondary axial threaded role, rotate it along the axis move backward, so as to realize the thread of patterns. This way can control can’t strong demoulding off the thread of cap, avoid a thread, higher precision.

Demoulding mechanism hydraulic motor are as follows:

 

Picture 5 for the return of the confirmation switch control, to solve the glue bottle caps, easy to turn a line off the problem, open mold before, first start hydraulic motor-42, the motor drive sprockets-39 to rotation, the chain fixed in the sprocket 23 and 39 in the rotation axis rotation to the action of 25, (spindle 25 and sprocket-23 by the groove cooperates, to avoid dry running), the gear 28 fixed in spindle 25, it will be transfer to neighboring gear-18, the gear-15 will be rotate by gear -18., thread cores-15 will be back by braces, cap 4 not move due to the screw thread, ,to realize the screw core-15 rotation and back.

In order to prevent thread cores took off all open cap 4, cap 4 sticks in the fix mold side, can make the thread cores took off 15mm for screw in advance, from the parting surface sanctions, make cores-7 leave from cap 4, and finally to start hydraulic motor control thread cores rotating at the same time back. 15 Due to open a has to take off before distance, slow combined a sticky mold force, and then demoulding from the core-15 automatically by the force of gravity.

 

 

 

 

Yosion Mould R&D department devotes many years to the Hydraulic motor for unscrew in cap mold,Now our professional help our customer make out top quality stacking moulds with lower cost. If you want a perfect solution for the Hydraulic motor for unscrew in cap mold,then come to us.

 

2012-6-17

...