Product Details

S6700-48-EI(48 10 Gig SFP+,without power module)

Name: Huawei S6700-48-EI 10G switch
Brand: Huawei
Availability: InStock

1. The S6700 series switches are next-generation 10G box switches that function as an access switch in an Internet data center (IDC) or a core switch on a campus network
2. 128K MAC
3. Intelligent stacking(iStack)
4. Dual power slot

Introduction

Huawei's S6700 Switches deliver high-performance 10 GE switching and forwarding; fully compatible with Huawei's Versatile Routing Platform software (VRP5), with built-in reliability and intelligent management features.

Advanced switching architecture and line-card buffering, with energy-efficient electronics and dynamic power management ensure smooth, sustained performance.
Add capacity when and where needed - SFP+ fiber optic service ports and Huawei's iStack virtualization let you add ports and capacity in the same rack or another rack with no impact on the network or any user.
Cost-effective fault tolerance - Integrated VRRP support lets you use two S6700 switches to ensure non-stop communications; ECMP support enables multiple equal-cost routes to upstream devices with automatic switching when an active route is unavailable.

Product Specifications

Item	S6700-24-EI	S6700-48-EI
Port	24* GE SFP/10 GE SFP+ ports	48* GE SFP/10 GE SFP+ ports
MAC address table	128K MAC address entries MAC address learning and aging Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses
VLAN	4K VLANs Guest VLAN and voice VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports 1:1 and N:1 VLAN Mapping QinQ and selective QinQ
IPv4 routing	Static routing, RIPv1, RIPv2, ECMP, and URPF OSPF, IS-IS, and BGP VRRP Policy-based routing Routing policy
IPv6 routing	Static route RIPng OSPFv3 BGP4+
IPv6 features	Neighbor Discovery (ND) PMTU IPv6 ping, IPv6 tracert, and IPv6 Telnet 6to4 tunnel, ISATAP tunnel, and manually configured tunnel ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type MLD v1/v2 snooping
multicast	Static Layer 2 multicast MAC address MAC-based multicast forwarding IGMP snooping and IGMP fast leave Multicast VLAN MLD snooping IGMP proxy Controllable multicast Port-based multicast traffic statistics IGMP v1/v2/v3 PIM-SM, PIM-DM, and PIM-SSM MSDP
QoS/ACL	Rate limiting on packets sent and received by an interface Packet redirection Port-based traffic policing and two-rate three-color CAR Eight queues on each port WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms Re-marking of the 802.1p priority and DSCP priority Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, port number, protocol type, and VLAN ID Rate limiting in each queue and traffic shaping on ports
Reliability	STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s) BPDU protection, root protection, and loop protection RRPP ring topology and RRPP multi-instance Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover SEP ERPS(G.8032) BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM E-Trunk
MPLS features	MPLS L3VPN MPLS L2VPN (VPWS/VPLS) MPLS-TE MPLS QoS
Security	DoS attack defense, ARP attack defense, and ICMP attack defense 802.1x authentication and limit on the number of users on an interface AAA authentication, RADIUS authentication and TACACS authentication SSH v2.0 Hypertext Transfer Protocol Secure (HTTPS) CPU defense Blacklist and whitelist
Management and maintenance	iStack (using service ports as stack ports) MAC Forced Forwarding (MFF) Virtual cable test Ethernet OAM (IEEE 802.3ah and 802.1ag) SNMP v1/v2/v3 RMON Web NMS System logs and alarms of different levels GVRP MUX VLAN sFlow
Interoperability	Supports VBST (Compatible with PVST/PVST+/RPVST)
	Supports LNP (Similar to DTP)
	Supports VCMP (Similar to VTP)
Operating environment	Operating temperature: 0OC–45OC Relative humidity: 5%–95% (non-condensing)
Input voltage	AC: Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 50/60 Hz DC: Rated voltage range: –48 V to –60 V, DC Maximum voltage range: –36 V to –72 V, DC
Dimensions (W x D x H)	442 mm x 420 mm x 43.6 mm
Powerconsumption	153W	240W