Product Feature:

         HOT 5.25 Media Dashboard PCIe to  USB2.0 All-in-one Card Reader 

Main Function Description:
1.2 USB3.0 HUB (HOST), transmission speeds of up to 5.0Gb / s, backward compatible with USB2.0 and USB1.1. Products built PCI-E interface (no need to buy the USB3.0 PCI / E card), As long as you motherboard has PCI / E interface and let your computer one step upgrade to USB3.0.
2.SATA interface transfer speeds of up to 3.0Gb / s, with a standard power cable to the SATA hard drive power supply and connection between the data line and the product, you can read and write directly to the hard drive, you can install the system as a disk with
3.eSATA interface transfer speeds of up to 3.0Gb / s.
4. Pre-take power outlet: 12V / 5V power output, standard power cord (SATA 15PIN Power Interface) directly to the SATA hard drive power supply by independent power switch.
5. The multi-card reader, read SD, MS, MMC, CF, XD, TF, M2-Series storage card.
Most similar products on the market can not read XD cards, but many high-end cameras are used XD Card
 

Built-in PCI-E interface: can be connected to the motherboard PCI-E 1X 8X 16X 32X with the socket. (PCI-E TO USB3.0 chip using NEC)
 
SATA hard disk connector: 2.5 / 3.5 inch SATA hard drive connection (with standard power cable to the SATA hard drive power supply and connection between the data line and the product, restart the computer or scan for hardware, you can read and write directly to the hard drive, you can install the system as disk use)