Product Details

Product Description

PVC Window Machine/Extruder Machine Plastic/Wood and Plastic Profile Production line

Specification

a) Installed power: 220v/3P/60Hz

b) Raw material: PVC/PE+wood owder

c) Output:30kg/h

Note:the output is different depends on operation and material.

d) centre height of extruder: 1000 mm±50mm(adjustable)

e) operation direction: from right to left

f) cooling water:≤5-20°C ≥0.3Mpa ~2.5T/h

g) compression air: 1.5m3/min >0.5MPa

Configuration

ITEM	AMOUNT
Double conical screw extruder	1
Mould	1
Vaccume calibrating cooling table	1
Hall-off machine	1
Non-dust cutter	1
Stacker	1
Conrolling system	1

Parameters

1,SJ65/132 twin conical screw extruder

Screw structure:optimized special model

Barrel structure: with special forced feeding groove In feeding sections

Material of screw and Barrel: 38CrMoAIA

Nitrogen layer depth of screw and barrel: 0.4-0.7mm, the brittleness not more than 2th grade

Main Technical Parameters

Item	SJSZ 65/132	SJSZ 80/156	SJSZ 92/188
Screw Diameters(mm)	65mm/132mm	80	92
L/D Ratio	22:1/25:1	22:1/25:1	22:1/25:1
Output(Kg/h)	120-240 kg/h	250-350	400-500
Main Driving Power(kw)	37	55	110
Heating Powder(Kw)	4 zones, 20Kw	5 zones, 38Kw	6 zones, 54Kw

2,Mould

a) Structure: special design for plastic profile

b) Materials: 40Cr, high quality alloy

c) The die flow channel is chrome plate, polishing treatment

3,Vaccume calibrating table

Calibrating table: 6000mm

Vacuum pump qty: 2units

Vacuum pump power: 4kw/unit

4,Puller and Cutter

Speed-drawing: 0-5m/min

Pressed tightly mode: pneumatic

Max. force-drawing: 30KN

Max clamped forced: 20KN

5,Stacker

Length can be overturned: 6000mm

Mode-overturning: synchronous with puller and cutter, and can length-measuring cut and overturn

6,Controlling system

a) Temperature control: OMRON,Japan

b) Contactor: Schneider from France

c) Inverter: ABB from Japan

Certifications

Detailed Images

Detail machine pictures or equipment producing

Wood plastic machine sample

FAQ

Before we send you quotaion, we hope to get the following information:

1. If you are interested in PIPE making machine, pls send us your pipe diameter specification and thickness requirements.

2. If you are interested in PROFILE making machine, pls tell detial size or give product drawing.

3. If you are interested in PERFORATION MACHINE, pls tell the material, mateiral width, material thickness, hole diameter, hole layout(Diamond or square), as well as holes distance between holes.

4. If you are interested in our professional SPIRAL WRAP MAKING MACHINE, Pls send us detail diameter specification or detail drawing.

5. Pls send us some sample pictures for us reference.

If you have other special requirements, pls tell.