pharmaceutical fluid bed dryer
Negotiable /Set
Min.Order:1 Set
Use
Mainly used in the pharmaceutical, food, chemical and other industries for the drying of powder or granular material
Principle
Boiling dryer is the air after heat exchanger to form hot air through distribution of valve plate into the host, wet material from a feeder into the dryer, due to the action of wind pressure, material in the dryer formation boiling state, and extensive contacts with the hot air, thus in a relatively short time completed material drying.
Characteristic
Fluidization and drying, heat and mass transfer quickly; in the closed negative pressure operation, no dust flying; the use of anti-static filter material, safe operation; no dead ends, clean thoroughly, no cross contamination; meet the requirements of GMP specification.
Model number | 3 | 5 | 30 | 60 | 120 | 200 | 300 | 500 | 1000 | ||
Project | Company | ||||||||||
Raw material container | Diameter | mm | 300 | 400 | 700 | 1000 | 1200 | 1400 | 1600 | 1800 | 2200 |
Volume | L | 12 | 22 | 100 | 220 | 420 | 670 | 1000 | 1500 | 2500 | |
Throughput | Minimum | Kg/batch | 1.5 | 4 | 15 | 30 | 80 | 100 | 150 | 250 | 500 |
Maximum | Kg/batch | 4 | 6 | 36 | 72 | 140 | 240 | 360 | 600 | 1100 | |
Steam consumption | Kg/batch | 12 | 23 | 70 | 140 | 211 | 282 | 366 | 465 | 800 | |
Compressed air | m3/min | 0.3 | 0.3 | 0.3 | 0.6 | 0.6 | 0.9 | 0.9 | 0.9 | 1.5 | |
Fan power | kw | 2.2 | 4 | 5.5 | 11 | 18.5 | 22 | 30 | 45 | 75 | |
Temperature | ℃ | Automatic adjustment of temperature -120 | |||||||||
Material collection rate | % | >99 | |||||||||
Operation time | min | 15-30 (depending on the specific material) | |||||||||
Final moisture content | % | -0.2 (depending on the specific material) |