Specifications

HDPE Gas and Water Pipe Extrusion Line
HDPE Pipe Extrusion Line is applicable for high speed extrusion of PE,PP,PB,PERT,ABS etc

 

 

Manufacturer of pe pipe production line

 

 

Details for PE Pipe Produciton line: 
1. It's mainly used to produce PE/HDPE Pipe or Profile. 
2. According to the pipe diameter and profile dimension to change the machine capacity. 
3. The extruder for iipe extrusion has high screw rotation speed and good plastication. It is suitable for different kinds of moulds. 
4. This kind of extruder has high capacity. The screw has good plastication and equipped with mixing unit. The extruder can ensure the products' smoothnesss and transparence.

 

 

 

PPR PE pipe production line: 

Process flow:
Raw material+master batches--mixing--vacuum feeding--material dryness--single screw

extruder--color string extruder--spiral mould--calibrator--vacuum spray calibration tank--spray cooling water tank--jet printer--belt haul-off--no-dust cutter--stacker--finished product inspecting&packing

Special single screw extruder for polyolefin, having high extruding velocity and effective plasticization.
Separation mixing screw specialized for polyolefin.
Specially designed three co-extruding die, reasonable channel, smooth outside and inside wall, and little internal stress.

Producing pipe limitΦ 20-Φ 160mm, manufacture velocity up to 16 m/min.
May be used to produce HDPE silicon core tube, ordinary PP-R, PE and PEX pipes.
Low cost: The cost of nanometer & anti-virus pipe is merely increase 5-10% on the ordinary pipe basis.

 

 

The PE/PP/PP-R pipe production Line is the queen of quality.
We can extruder different kinds of PE/PVC/PP-R pipes for your needs

 

The production line has production capacity of churning out Φ16mm-Φ160mmPE/PP/PP-R pipe continuously with assembling the special high-speed single screw extruder,which is distinguishingly designed with co-extrusion die head,the production speed can reach 20m/min.The PP-R pipe made by the facility has such feature of smooth on both sides,weak internal stress,anti-corrosion,antibiosis,shock resistance,no leakage,light weight,economic investment, convenient application and so on.This facility can aslo be used to produce the HDPE silicone core pipe,PB pipe,PEX pipe,etc.

 

       The economic and technical norms of the finished products are all reached the international standards after been detected by National chemical construction test center.which are the first choices to replace the traditional galvanized pipe and applicable to so many fields,such as conveying the hot and cold water,central-heating,and floor heating.

 

Technique Parameter:

	SJ-30	SJ45	SJ65	SJ90	SJ120	SJ150
L/D	25-33	25-33	25-33	25-33	25-33	25-33
Main Motor Power	2.2-7.5	7.5-22	18.5-55	55-185	90-280	110-300
Heating Power	5-8	6-12	12-18	16-40	20-60	30-80
Max.Extruding Capacity	18	60	180	450	650	950
Cooling Mode	Wind&Water Cooling	Wind&Water Cooling	Wind&Water Cooling	Wind&Water Cooling	Wind&Water Cooling	Wind&Water Cooling