Material:

Q235B Steel (Chinese standard steel), SS304, SS316 & SS316L

Surface Finish:

1.Electro zinc plated  cable tray support  – for indoor use to BS EN 12329-2000, 12microns thick.

2.Powder coated  cable tray support  - for indoor use to JG/T3045-1998, between 60 and 100 microns thick

3.Hot Dipped Galvanized  cable tray support  – for outdoor use to BS EN 1461-1999, between 60 and 80 microns thick

4.Electrolytic Polishing  cable tray support  – for stainless steel use

Dimensions: (Available for customized)

1.Cable tray support dimensions are all internal size.

2.Cable tray supports are constructed with a 50mm x 100mm, 50mm x 50mm, and 40mm x 40mm mesh grid.

  Depth: 25mm, 50mm, 75mm, 100mm, 125mm, 150mm...

 Widths: 50~1000mm.

 Length: Maxiun 3000mm

 Wire Diameter:  3.5~ 6.0mm

Installation Notice:

1.Bends, Risers, T Junctions, Crosses and Reducers can be made from cable tray support straight sections flexibly in project site.

2 .Cable tray support should be supported at a normally span 1.5m by trapeze, wall, floor or channel mounting methods (Maxium span is 2.5m).

3. Cable tray support can be safely applied in places where the temperature ranges between -40°C and +150°C without any change to their characteristics.