2hours quick cracking soundless expansive mortar

for stone rock and concrete demolition

Super Quality Expansive Mortar in China!  Brand: SPLIT-STAR

..................................................................... 

Big Advantages:

1.   expansive strength is around 1800PSI

2.  cracking time within 2hours, and quickest within 40minutes

3.  quality is very stable at any time, no trouble of "no crack" or "blow out shot"

4.  Quick delivery within 20days, and fastest within two weeks

5.  MSDS certificate available

6.  suitable for small holes 30-40mm and also large holes upto 110mm

7.  MOQ one ton is available

...................................................................... 

Characteristics of expansive mortar

    1. Controlled Demolition

    2. Dust-free

    3. Vibration Free

    4.No License Required

    5.No Flying Debris

    6. Envireonmental Friendly

    7. Silent Operation

    8. Rapid Usability

    9.Ecomomy

    10. Safety for Vicinity

It's not Explosive. It is used for cutting of rock, concrete and demolition.

Applications

A. Granite, marble, sandstone, limestone, quartzite quarrying and cutting

B.  Rocks pre-splitting, fracture, cutting, demolishing and removal

C.  Controlled demolition or cutting concrete when explosives not allowed

D.  Fracture and demolition of the concrete buildings and structures 

E.  Rocks cutting for road construction 

F.  Excavation of trenches and foundations 

G.  Underground excavations and removing boulders 

H.  Marine excavations including underwater operations

--------------------------------------------------------------------------------------------------------------------------------------------------------------------- 

USAGE:

Very Easy Only Three Steps: Drilling, Mixing&Pouring, then Waiting for cracking within 2hours!

First drill a hole in the blasted object.

Second, pour some of the produce into the bucket with water, the proportion of water and supplies is 1:3, and then stir it into a paste.

Third, slowly pour it down the hole and fill it with the lid uncovered.

Fourth, about 2hours later, the object blast. whatever time you can choose as required.

The process in short: drilling-stirring-pouring-blasting

Hole Diameter:

The diameter of drilling has a great effect on the explosion, so if it is too small, it will not explode well. On the contrary, if it is too big, it will be easily too strong. A bit with a diameter of 30-40mm is better.

Pitch-row:

30-50cm for reinforced concrete  

10-15cm for marble

5-10cm for granite

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Type/Grade:

We can adjust the material grade to meet with different ambient temprature range as per client's request.

Like 5-10 DEG C, 10-20 DEG C, 20-30 DEG C, etc...

---------------------------------------------------------------------------------------------------------------------------------------------------------------------

Consumption

---------------------------------------------------------------------------------------------------------------------------------------------------------------------- 

Pre-drilled hole design table:

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------

Cracking Mechanism

Fig. 1 Fracture mechanism by the expansive stress of Non-explosive demolition / cracking agent

Fig. 2 Sectional-view of the crack formation in the material with two free surfaces

When multiple numbers of holes are filled with Non-explosive demolition / cracking agent, that are properly adjacent to each other, the cracks from the hole propagate to connect with the neighboring holes, as shown in Fig. 3. 

It is therefore possible to determine the directions of the cracks as planned by appropriately arranging the hole spacing and its depth and its inclination.

Establishment of free surface:

In the case of trenching, shafting or tunneling, if all holes are drilled vertically and filled with Non-explosive demolition / cracking agent, the crack width can not increase but horizontal cracks initiate. Therefore, in order to obtain two free surfaces, inclined holes or pre-splitting must be required.  

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

CAUTION: Hazardous to Humans and Domestic Animals

Causes respiratory tract, eye and skin burns. Do not get in eyes or on skin or clothing. Do not breathe dust. Keep container closed. Use only with adequate ventilation. Wash thoroughly after handling.

 Composition / Information on ingredients:

--------------------------------------------------------------------------------

First Aid +

Eye or Skin Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes or skin with plenty of water for at least 20 minutes. Get medical attention immediately.

Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention immediately.

Ingestion: Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention immediately. 

--------------------------------------------------------------------------------

Environmental Precautions

NO KNOWN significant effects or critical hazards.

The product itself and its products of degradation are NOT toxic. 

 --------------------------------------------------------------------------------

Storage and Waste Disposal

 Keep container tightly closed. Keep DRY in storage. Keep out of reach of children and pets.

The generation of waste should be avoided or minimized wherever possible. Avoid dispersal of spilled material, runoff and contact with soil, waterways, drains and sewers.