Specifications

new rooftop solar water heater
solar water heater with EN12975, SPF, Solar keymark, CE, ISO9001, well performance
prompt deli

new rooftop solar water heater

The split Solar Heating System is specially designed for residential house and building. Such system separates the solar heat collecting unit and the water tank. The collector can be installed at the sunny facet of a building, such as roof ot side wall. The water tank then can be installed in house with convenience. This makes it possible and easier to install the system aesthetically with original building.

 

Model: SP-226 (Solar Heating System with Double Heat Exchanger )

 

Working Principle

The pressure pump connects the circulation system between the Solar Heat Absorption Collector and the Water Tank. When the temperature difference between them reaches the trigger point, the system automatically starts circulation and naturally provides the heating water.

 

Style A. Split pressures solar water heater installs on flat roof.

 

 

Style B.

 

Specification

1)    Tank: Porcelain Enamel Tank
Tank material (exterior): Colored Steel Sheet
Tank material (interior): Porcelain Enamel Tank
Tank Capacity: 100L - 450L
Outer Tank Diameter: 480mm or 570mm
Tank Include: 1.5kw Electric Heating Element ,Mg Anode , T&P Valve ,Sensor, Double Copper Coil
2) Vacuum Tube: Heat Pipe
Diameter: 58mm
Length: 1,800mm
3) Bracket frame: Galvanized Steel

 

SOLAR CONTROL SYSTEM Main functions

1.Display clock and weekday

2.Display temperature

3.Temperatature difference circulation pump provides three speed levels

4.Temperature difference circulation

5.Three periods timing circulation for pipeline

6.Three periods timing heating (_for tank)

7.Frost protection

8.Memory function

9.Set tank temperature

10.Display flux

11.Display system pressure

12.Storage tank overheating protection

13.Collector cooling function

14.Holiday function

15.Anti-bacteria function

16.System emergency cut-off funcion

 

Features

• Module Design with flexible system configuration. Easy installation and integration with existing building.
• Intelligent control of the system operation with the system temperature monitoring.
• Dual Anti-Freeze Protections with thermal media in the circulation pipe and anti-freeze circulation control.
• Possible to integrate with current heating system (electric or gas baesd) to a hybrid system to provide water heating and floor heating system.
• Go Green on Sunny Day. Take the full advantage of Mother Nature to enjoy free heating.

 

Functions

1. Constant temperature circulation-- adopt the auto. circulation system to realize constant temperature of the water inside the solar system; Ex-factory default is to ensure the constant temperature of water inside the system and pipelines.

 

2. Overheat protection-- It includes protection of solar collector and electric booster. The former will be operated by the controller automatically to ensure the safety of the solar collector and the solar heat storage system; the later will be controlled by the temperature sensor automatically, to make sure the booster work in a safe condition. Take manual operation to resume to the working condition.

 

3. Pressure limitation--It functions by automatically sensing the pressure and temperature of the parts, so as to ensure the normal operation of the system.

 

4. Anti-freezing--It is realized through the circulation of the working fluid to make sure the safety of the operation at the limited temperature.

 

We sell the Solar collector, Porcelain Enamel Tank, Circulating Pump ,Solar Station above.
When the solar collector makes hot water you use no hydro, when there is not enough sun to do so , or at night, you heat your water with electricity. OEM requests are very welcomed.