XY-1B drilling rig  Introduction:

XY-1 B Drilling Rig is a hydraulic-feed low speed drilling rig. To meet the needs of different consume with widely practical use,we advance XY-1B,drilling rig,which is added with water pump. The rig, water pump and diesel engine are installed on same base. We advance XY-1 B-2 Model drill, which is added with travel lower chuck.

XY-1B type:    track-mounted rig,    trailer mounted rig

Drill Rigs Features:

drilling rig 
1.Being equipped with ball type holding device and hexagonal Kelly, it can accomplish no-stopping working while lifting the rods, thus drilling efficiency increase. Operate conveniently, secure and reliable.

2.Through the pressure indicator of bottom hole, the well condition can be observed easily. Close levers, convenient operation .

3.The hoist spindle1s supported by the ball bearing,it could e1immate the event of the supporting bearing burned-out. Under the spindle head, there is a well top plate for unscrewing the rods conveniently.

Application:

Technological Data of  XY-1B drilling rig :

1.Fundamental parameters                                                                           

Hole diameter                                                                                        59, 75, 91, 110, 130, 150 mm 

Drilling depth                                                                             200, 150, 100, 70, 50, 30 m

Rod diameter                                                                            42 mm

Drilling angle                                                                             90° - 75°

Overall dimensions (L x W x H)                                                XY-1B 1433 x 697 x 1273 mm

                                                                                                  XY-1B-1 1750x 780x 1273mm

                                                                                                  XY-1B-2 1780x 697x 1650mm

Drill weight (exclude power)                                                     XY-1B                                525 Kg

                                                                                                 XY-1 B-1                            595 Kg    

                                                                                                 XY-1B-2                             700 Kg     

2.Rotation unit                                                                          

 Spindle speed (4 shift)                                                             71,142,310,620 rpm

 Spindle stroke                                                                          450 mm

Max. Spindle lifting speed without load                                     0.05 m/s

Max. spindle downward without load                                        0.067 m/s

Max. Feeding pressure                                                             15 KN

Max. Lifting capacity                                                                  25 KN

Max. Spindle output torque                                                       1.25 KN.m

3.Hoist

Lifting capacity (single line)                                                       15 KN

Drum speed                                                                               19,38,84,168 rpm

Drum circumferential velocity (second layer)                             0.166,0.331,0.733, 1.465 m/s

Drum diameter                                                                           140 mm

Spindle pull-down max                                                               15KN

Wire rope diameter                                                                     9.3 mm

Brake diameter                                                                           252 mm

Brake band broad                                                                       50 mm

4.Hydraulic Oil pump

Type                                                                                            YBC-12/80

Rated pressure                                                                            8MPa

Flow                                                                                             8 ml/r

Rated speed                                                                                1500 rpm  

5.Power unit

Diesel engine                                                        

Type                                                                                             ZS11051            

Rated power                                                                                 12.1 KW 

Rated speed                                                                                  2200rpm

Electric motor

Type                                                                                              Y160M-4

Rated power                                                                                  11 KW

Rated speed                                                                                  1460 rpm

Drill rigs Factory:

XY-1B drilling rig ware house:

  XY-1B drilling rig  Customer:

Quality Drill rigs Manufacturer In China  -FAQ

Payment terms:100% by TT ,

Delivery time:10 days after deposit

Supply ability:1000 pcs per month.

If you want to get more information,please contact me.

Name:Eric Qin 

Skype id:hargrand163