ITC TR-800A series professional power amplifier for karaoke audio amplifier
Negotiable /Set
Min.Order:1 Set
Guangzhou Baolun Electronics Co., Ltd.
* In 1U design, using technique of real-time power tracking amplifier, high performance amplifier circuit design, hifi sound quality to restore the quality of audio sources perfectly;
* Support soft-start to avoid causing interference to other devices, when it’s turned on and absorbs large current;
* With intelligent clipping distortion and over-current pressure limit system;
* With 30/50Hz high pass filter;
* With auto temperature control fan cooling system;
* Multiple modes: stereo, bridged and parallelism;
* Complete and reliable safety precautions, working mode indicators and multiple detection system for over-heat, over-pressure, low-voltage, overflowing, short, etc.
Output Power (20 to 20KHz/THD≤1%) | TR-800A | TR-1000A | TR-1200A |
Stereo/Parallel 8Ωx2 | 800W x2 | 1000W x2 | 1200W x2 |
Stereo/Parallel 4Ωx2 | 1200W x2 | 1500W x2 | 1800W x2 |
Bridged 8Ω | 2400W x2 | 3000W x2 | 3600W x2 |
Connector | XLR, TRS | ||
Voltage Gain (@1KHz) | 38dB | 39dB | 40dB |
Input Sensitivity | 0dBu(1V) | ||
Input Impedance | 10KΩ unbalanced, 20KΩ balanced | ||
Frequency Response (≤1W) | 20 to 20KHz/±1dB | ||
THD+N | ≤0.05% | ||
SNR (A Weighted) | ≥90dB | ≥90dB | ≥95dB |
Damping Factor (@1KHz) | ≥200 @8ohm | ||
Separating Degree (@1KHz) | ≥70dB | ||
Protection | Over-pressure, low-voltage, overflowing, short, DC protection | ||
Indicators | Power, temp. Protection, overflowing protection, clipping distortion, short protection, etc | ||
Cooling Method | Fan cooling | ||
Power Supply | AC 220V to AC 240V 50/60Hz | ||
Power Consumption | 2800W | 3300W | 4000W |
Dimension (LxWxH) | 483x390x44mm | ||
Weight | 8Kg | 8.2Kg | 8.5Kg |
ITC promise the electronics yearly failure rate is less than 1%.
ITC guarantee all electronics of 3 years quality warranty.
ITC could supply 1% wearing spare parts free of charge.
ITC guarantee all loudspeakers of 6 months quality warranty.
All of quality complaint shall be attached with serial number, failure test report and photos.
All of the quality compliant shall be feedback with a solution within 48 hours.
ITC could supply circuit diagram documents for repair.
Full-sealing package of Products:
We adopt full-sealing bubble film+strech film+wood frame (or wood box). It will keep the moist from entering into the package to make the products rusted.