Product Details

Product Name: Aluminum plastic blister pack machin

Aluminum plastic blister pack machin is used in the pharmaceutical industry of capsule, tablet, and pilled foodstuff, food industry, liquid chocolate candies, chewing gum, cookies, jam, facial mask, eye of the cosmetics industry, medical device industry, needles, syringes, infusion tube and electronic component products such as aluminum-plastic, paper-plastic blister packaging.

MAIN TECHNICAL PARAMETERS

Model		350A	250A	140A
Blanking frequency(times/min)		15-50	15-50	15-50
Sheet's quantity of one blanking(sheets)		5-6	3-4	1-2
Adjustable scope of feed travel(mm)		5400-18000	3600-12000	1800-6000
Appropriate for Capsule		10-150	10-140	10-130
Max Forming area and depth(mm)		350×130×15	250×120×15	140×110×15
Capacity of air compressor((m3/min) )		≥0.45	≥0.38	≥0.36
Power supply		380V 50HZ 12KW	380V 50Hz8.5KW	380V 50Hz 635KW
Wrapper specification(mm)	PVC	350×(0.2-0.5)	250×(0.2-0.5)	140×(0.2-0.5)
Wrapper specification(mm)	Aluminum foil	350×(0.02-0.035)	250×(0.02-0.035)	140×(0.02-0.035)
Overall dimensions(mm)		3800×718×1750	3200×650×1450	2850×530×1450
Part size(mm)		2000×718×1750	1750×650×1450	1450×550×1300
Part size(mm)		1800×718×1750	1450×650×1450	1400×550×1450
Weight(Kg)		2000	1700	1000

MACHINE ADVANTAGE

1. All of the air supply and synchronization of the machine is controlled by the encoder. All synchronous data have been programmed in advance so that there is no need to adjust air supply and pulling time manually. The machine in other factory use Cam control, which means the process is mechanical. The biggest disadvantage of it is that the friction is inevitably which will lead to wear and tear. As time passes, the synchronization is not accurate. But our machines use encoder control, so that there is no need to worry about the synchronization. If the encoder is broken, you can also buy it in the local, it’s convenient.

2. Our machines have PRC (print register control) system, is the cursor version of function, because the machine is a stepper motor, so is true of PRC system forever won't generation shift. Other manufacturers may be gas clip can only be manually adjusted, a long time after the shift will occur.

3. Our machine use Stepper motor to control the pulling length. When change the model, there is no need to adjust the machine so that it’s convenient and easy operating. What I want to mention is that the machines in other factory use gas clip to control the pulling length. It has two shortcomings. First, when you change the models, you need to adjust the pulling length manually which means adjusting screw in the pulling position. If the Operating workers is unskilled, it will waste the material and time.

NEW FEEDER

Under the control of the quantity of material, can keep the disc brushing not too full, filling the products more accurately
Moderate material can keep PVC not deformated, make machine operate more stable