Specifications

48 cav. pet preform injection molding system, the cooling robot with 3 stations, 2 screw, cycle:10s, 4560g, 360Ton

Features:

1. Two state plasticizing enables plenty injection quantity;

2. Take out plate with three working position insures sufficient cooling time and shorter cycle time; 3. High quality parts and accessories from world famous brands enable higher speed and precision; 4. Special screw design increases torque while brings down shear force to avoid degradation;

 5. Accumulator from world reputable manufacture increases performance while brings down power consumption Reflex platens distribute clamp force evenly across the platen face. Reflex platens:

1. Allow for 10-30% lower clamp tonnage 2. Decrease mold wear 3. Improve part quality.

ITEM		UNIT	DMK-PET48A	DMK-PET48B
INJECTION UNIT	Screw L/D Ratio	L/D	25	25
	Screw Diameter	mm	100	120
	Injection Pressure	Kgf/cm2	875	875
	Output(Max)	Pcs/h	17000	17000
	Theory Shot Volume(Max)	cm	2850	3800
	Shot Weight(PS)	g	3420	4560
		ozs	121	161
CLAMPING UNIT	Clamping Force	T	360	360
	Clamping Stroke	mm	645	645
	Max/Min Thickness of Mould	mm	300~700	300~720
	Space Between Tie Bars (WxH)	mm	660~860	660~860
	Ejector Stroke	mm	180	180
	Ejector Force	T	12	12
	NO.of Ejector Pins	PCS	5	5
	Max Pressure of System	Kg/cm2	140	140
MOULD&ROBOT	Cavity(Max)	PCS	48	48
	Neck of Bottle(Max)	mm	42	42
	Length of Preform(Max)	mm	190	109
	Weight of Preform(Max)	g	35	50
	Type of Mould	Needle Valve of No-Cutting PET Preform Molds
	Manipulator	Cavity	48x3	48x3
	Cooling Form	Cavity	144	144
POWER UNIT	Pump Motor Power	KW	25	25
	Robot Power	KW	25	25
	Mould Heater Capacity	KW	48	48
	Heater Input Capacity	KW	71	71
	Total Power	KW	264	264
OTHER	Electric Power Supply(3-phase AC)	V/HZ	380/50	380/50
	Chilling Water	°C	5~15	5~15
		Mpa	0.6	0.6
		L/min	600	600
	Coolling Water	°C	30~55	30~55
		Mpa	0.25	0.25
		L/min	200	200
	Compressed Air	Mpa	0.7~0.9	0.7~0.9
		L/min	800	800
	Machine Size (LxWxH)	mm	8455x3884x2230	8455x3884x2230