Digital pressure controller and indicator with RS485 communication
USD $20 - $25 /Piece
Min.Order:2 Pieces
Zhongshan Sommy Automation Co., Ltd.
Digital pressure controller and indicator with RS485 communication
FAQ (Frequenlty Asking Questions)
1. What is the function of SR7 pressure controller ?
It can display for various sensors with 4-20mA , 0-10V or other liner signals output . And make control
by high and low limit alarm .
2. What input signal does the pressure indicator support ?
SR7 digital indicator can input K, J, E, T, R, S ,B, N, CU50, CU100, PT100, JPT100, 0-10V, 4-20mA, 0-400Ω.
3. What sizes do you have for the pressure controller and indicator ?
We have 48HX48W, 48HX96W, 72HX72W, 86HX48W, 96HX96Wmm for you to choose.
4. Can the SR7 sensor indicator display weight or length or RPM ?
Yes , it has many units for selection , such as m , cm , mm , kg ,g, Mpa , pa , Pa, ba , Mba, N , W, Kw, RPM , V, A , mA ect.
You can set the display unit on the setting manual of the product based on your actual requirement.
5. What is your warranty period ?
We offer 3 years warranty period for the pressure indicator and controller.
Power supply | 100-240VAC/DC |
Meter current | <30mA |
Analog output | 4~20mA analog current,loading resistance: 600Ωmax |
Alarm output | Relay output loading capability:2A/230V AC |
Auxiliary voltage output | DC 24V/30mA |
Dielectric Strength | The inter-communal dielectric between supply-side, relay contacts, the signal input terminal higher than 2000VAC 50Hz 1Min |
Communication | RS485 communication interface,MODBUSRTU protocol |
Panel Protection Level | IP65 |
Work temperature | -10~60℃ 40~80RH% |
Weight | 0.43kg |
Wire Connections