Specifications

2bbl beer brewing machine
high quality factory price
full argon arc welding
one stop service
CE&ISO certificated

Mechanical polishing micro brewery system 2bbl beer brewing machine

Beer brewing introduction

The malt is crushed in a malt mill to break apart the grain kernels, increase their surface area, and separate the smaller pieces from the husks.

The resulting grist is mixed with heated water in a vat called a "mash tun" for a process known as "mashing".

After the mashing, the mash is pumped to a lauter tun where the resulting liquid is strained from the grains in a process known as lautering. 

The lauter tun generally contains a slotted "false bottom" or other form of manifold which acts as a strainer allowing for the separation of the liquid from the grain.

The wort is moved into a large tank known as a "cooking tun" or kettle where it is boiled with hops and sometimes other ingredients such as herbs or sugars.

The specification of 2bbl  beer brewing machine

Mash system
01.Mash & Lauter Tank(2bbl)	Inner(SUS304),thickness:3.0mm; External-Jacket  (Stainless steel), thickness: 1.5mm; Cylinder (sharp type, SUS), thickness: 1.5mm. Inner surface treatment: welds grinded to Ra 0.4µm. Insulation: Polyurethane-thickness 80 mm.
02.Boiling &Whirlpool Tank(2bbl)
03.Hot water tank2bbl)	Stainless steel (SUS304)
04.Mill machine	150Kg/h;Power: 3kw, voltage:380V
05.Boiler water treatment	1000kg/h;heating;water pump power: 1.5kw
06.steam generator	50kg/h;Steam temperature: 151-170°C
07.Wort pump	3000L/h;Power:0.75KW, lift15m, Rev:2880r/min
08.Plate Heat exchanger	15 Square meters;exchange board material SS304
09.Pipeline & Valve VLV	SUS304 ;single surface weld & double surface forming, no dead angle
10.Wort measuring meter	Stainless steel
11.Venturi tubes	Stainless steel;Heating exchanger wort export
12.Venturi tubes	Stainless steel;Heating exchanger wort export
13.Saccharometer	Glass
14.Rake	SUS304 Lees out rake
15.Operation platform	Stainless steel
Fermentation system
01.Fermentation tank	Inner(SUS304),2.5mm;Jacket-1.5mm;welds grinded to Ra 0.4µm (attached all-sided cleaning ball);Polyurethane-thickness 80 mm;cone 75°resist compression design,SUS miller board temperature drop.
02.Yeast adding tank	Stainless steel 304
03.Food tube	Include tube Joints and hose hoops
04.Refrigerant pipelines	PPR/ Stainless steel
05.Keep warm tube	polyethylene
06.Electromagnetic put air out	1 piece
07.Electronic gauges	6 sets
Cooling system
01.Ice water tank	Material: Inner(SUS304),thickness:2.5mm;External-Jacket (Stainless steel); Insulation: Polyurethane-thickness 80 mm.
02.Refrigerating unit	Capacity: 9000 kilocalorie; medium:Freon 22
03.Circulate pump	carbon steel
04.Pipeline& Valves	PPR/ Stainless steel

 

The whole set equipment is made of austenitic stainless steel. The cooling jacket adopts dimple jacket. The jackets are provided at tank body and conical bottom to effectively increase the cooling speed. Heat exchanging area of jacket of different proportions can be allocated according to customers' technological requirements. Widely used in brewery ,bar, hotel ,family etc.

 

 

 

  

 

 

Once fabrication and quality control inspection is complete, your equipment is expertly crated and shipped to arrive on schedule at your premises, ready for installation.

We offer, at your discretion, our experienced installation team to supervise installation of your systemWe recommend that our customers use us to commission their system. At you request, we can send one of our experienced brewery-industry professionals. They will instruct you in how to properly run your brewery and advise you on the finer details of brewing.

Welcome to contact me for more information about our 2bbl beer brewing machine!