1.PVC Waterproof Membrane

PVC Waterproof Membrane

 Introduction:

Polyvinyl Chloride (PVC) waterproof membrane is a new polymer waterproof membrane. The raw material is polyvinyl chloride resin, mixed with plasticizer, filler, antioxygen, ultraviolet absorber and other auxiliaries. 

Features:

1) Excellent aging resistance. Service life of roofing material is over 20 years; service life of underground material is over 50 years.

2) Root resistant penetration, specially used on planting roofings.

3) Welding installation. Joints are solid and environment friendly, no pollution.

4) High tensile strength, good elongation and dimensional stability.

5) Good plasticity, easy and suitable for details installation.

6) Fireproof. Fire extinguished out of the ignition resource.

7) Surface is smooth, no fading and dirty resistant.

8) Width is over 2m. Construction wastage is small, more economical.
   

Classification:

N: Homogeneous PVC membrane

L: PVC membrane with fabric backing

W: Reinforced PVC membrane
 

Type and Using:

N1-Exposed PVC waterproof membrane.(It is mainly used as details treatment for exposed roof waterproof project)N2-Non-exposed PVC waterproof membrane.(It is mainly used as details treatment for non-exposed roof waterproof project)L1-Exposed PVC waterproof membrane with fabric.(It is mainly used for exposed roof waterproof project)L2-Non-exposed PVC waterproof membrane with fabric.(It is mainly used for non-exposed roof waterproof project) W1-Exposed reinforced inside PVC waterproof membrane . (It is mainly used for steel structure roof exposed waterproof project) W2-Exposed reinforced inside PVC waterproof membrane . (It is mainly used for steel structure roof non-exposed waterproof project)

Packing Method:

Packed by PP woven bag and pallets

Lead Time:

7 days after getting the payment

Cautions:

1. Do not put the membrane on a pollution, water and ice ground.

2. Construcion of waterproof layer operations can't be crossed, device shall be installed on the waterproof layer, parts should be 

done to strengthen the basis of device and to take protective measures.

3. Do not touch the waterproof layer with thorn sharp objects after it's has been completed, don't put sundries or any additional 

buildings above the waterproof layer to avoid damaging it.

4. material should be stored in well-ventilated place and avoid being exposed to the sun or rain. The temperature in stored places can not be higher than 45° C. It has to be avoided acid, alkali, oil and organic solvents.