Product Details

certificate Our package :As picture

OUR MODEL

Electric turbo charger---30W~100W
Used for motorcycle

Product Specifications: CFW125CC ---0.125L
Continuous Ignition Speed Range: 11000r/min
Charging voltage (current): 2500rpm when> 8A; 8000rpm when <11A
With the electric turbocharger matching; 1A-2A ≈ 30W

Product Specifications: CFW150CC ---0.15L
Continuous Ignition Speed Range: 10000rpm
Charging voltage (current): 1500rpm when> 8.6A; 5000rpm when> 10A
With the electric turbocharger matching; 2A-3A ≈ 30W

Product Specifications: CFW200CC ---0.2L
Continuous Ignition Speed Range: 10000rpm
Charging voltage (current): 1500rpm when> 8.6A; 5000rpm when> 12A
With the electric turbocharger matching; 2A-3A ≈ 40W

Product Specifications: CFW250CC ---0.25L
Continuous Ignition Speed Range: 10000rpm
Charging voltage (current): 1500rpm when> 8.6A; 5000rpm when> 14A
With the electric turbocharger matching; 3A-4A ≈ 50W

Product Specifications: CFW300CC ---0.3L
Continuous Ignition Speed Range: 10000rpm
Charging voltage (current): 1500rpm when> 8.6A; 5000rpm when> 12A
With the electric turbocharger matching; 4A-5A ≈ 60W

Product Specifications: CFW350CC ---0.35L
Continuous Ignition Speed Range: 10000rpm
Charging voltage (current): 1500rpm when> 8.6A; 5000rpm when> 11A
With the electric turbocharger matching; 4A-5A ≈ 70W

Product Specifications: CFW400CC ---0.4L
Continuous Ignition Speed Range: 10000rpm
Charging voltage (current): 1500rpm when> 8.6A; 5000rpm when> 11A
With the electric turbocharger matching; 5A-6A ≈ -80W

Product Specifications: CFW450CC ---0.45L
Continuous Ignition Speed Range: 10000rpm
Charging voltage (current): 1500rpm when> 8.6A; 5000rpm when> 11A
With the electric turbocharger matching; 6A-7A ≈ 90W

Product Specifications: CFW500CC ---0.5L
Continuous Ignition Speed Range: 12000RPM
Charging voltage (current): 5000rpm when 28.7A; 8000rpm when 29.5A
With the electric turbocharger matching; 6A-7A ≈ 100W

DIY Turbo Electric Supercharger

Manual

DIYTurbo 5000. This product is through the promotion of air flow and increase engines breathing capacity, improve engine compression ratio, speed up the engine combustion efficiency and reduce engine exhaust pollution emissions.

Apply to all injection engine used to accelerate the conversion to increase 15 percent to 30 power.

1. Technical indicators for power turbine engines

Is based on the International Electrotechnical Commission (IEC) standards currently in force.

Power turbines: Motor using precious metal commutator, high-quality brush, high-speed bearings, high temperature strong magnetic tile; and the casing made of ABS engineering plastic.

2. Installation of warning

1. To prevent personal injury, always disconnect electrical connection when installing or servicing this product.

2. Please install and operate under the professional guidance, at the same time try to avoid the high temperature region.

3. Before Installation, please comprehensive inspection of the engine(oil and electric circuit) to identify the engine is working properly.

3. Run the installation

1. Must use key to control electric turbo relay to the ignition switch firewire ON-OFF.

2. Turbine power switch can be installed in the cab above the accelerator pedal, and also can be mounted next to the engine throttle(the start of fuel pressure, the close of oil pressure loss).

3. Circuit of turbo must use specific wire connection, can not be arbitrarily random connection in order to avoid unnecessary losses.

4. Turbo negative must be connected to the battery negative, the ground may result in insufficient supply of electric turbocharger.

4. circuit

.Our customers: from all the parts of the world

We are looking forward to establishing business relationship with you.