Excellent quality Impact Resistance
High Strength motorcycle powdercoating powder

Trade Assurance

Enabling businesses to trade with confidence

With Trade Assurance, you’re covered for:

On-time shipment and Pre-shipment product quality (Optional)

AVERAGE COVERAGE 

8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure. Storage products in line with the above conditions, since the date of production, effective storage period is 6 months. Over the storage period may be re-tested and the results were consistent with, can still be used.

HEALTH AND SAFETY 

Powder coating is a non-toxic products, but should be avoided in the course of inhalation of dust. Proposed operators wear appropriate dust mask, glasses. If possible, try to avoid long-term skin contact with powder coating

  Powder Coating (Pintura en polvo ) is the coating of choice when an attractive, durable and long lastingprotective finish for metal parts and components is required. Powder Coating's unique composition enables it to outperform conventional paints and surface treatments on all levels including resistance to chipping, scratching, and chemicals as well as protection from corrosion,oxidation, and ultra-violet breakdown (fading). An extensive variety of finishes is available including solid colors and metallics (in high-gloss, semi-gloss, satin, matte, flat, texture, wrinkle) as well as simulated patinas and visually stunning special effect colors like transluscents, candies and sparkles.

1.  Strong adhesion of  powder coating, especially for metal;
2.  Paint film mechanical performance is good, high hardness, scratch resistance, corrosion resistance;
3.  low melt viscosity, good flowing property, basic no pinhole coating and shrinkage cavity defects;
4.  many design and color,  powder coating can be made without light, light, decorative pattern, hammer, etc.
5.  a coating thickness of the coating  can be up to 50-300 microns, for not coated powder,  can be recycled again;  

1. Residential – Commercial – Industrial – Architectural – Marine 
2. Automotive – Motor Cycle Frames – Wheels & Parts
3. Bicycles Frames & Parts – ATV’s – Airboats
4. Aluminum Extrusions – Decorative Metal – Trade Show Exhibits
5. Retail Displays – Fixtures – Sand Blasting etc.

                                    Excellent quality Impact Resistance
               High Strength motorcycle powdercoating powder