Specifications

1,We are the professional aluminum foil manufacturer.
2,Provide you competitive price with high quality.

 

Environmentally safe, suitable for cooking barbecue, architectural decoration, insulation, lighting reflection

 

Foil density of 2.70 g/cm3. Melting point 660.4 °C. The boiling point of 2327 ° C, and the appearance of the silver-white, foil in the molecular structure of the high and low temperature (-20 ° C to -250 °C) are stable, room temperature aluminum and oxygen in contact with the air oxidation reaction is started for generating the alumina surface protective die film, protect the inside the aluminum is not further oxidation, so that it does not release aluminum atoms and any other toxic substances.

Foam or plastic temperature reaches 65 degrees Celsius, will begin to release a toxic substances called "dioxin" ------ a 'carcinogenic' material! ! ! We currently market are still using this foam or plastic lunch boxes, especially breakfast of rice noodle soup, porridge and other food in costumes when the temperature exceeds 65 ° C every day eat slowly poison! !

 

Foam lunch boxes back in 1995 by the state strictly banned the production and use, regardless of incineration and landfill will not work, will produce more than 10 kinds of toxic gases when they are burned, a direct result of air pollution (experiment proved such tableware below 65 °Cthe high temperatures cause dioxin (Dioxin) generation, and it is the "most vicious" a 'carcinogenic' substance); addition to its natural degradation cycle extremely long in ordinary soil burial environment, itdegradation cycle as long as 200 years or so, great soil pollution; same time can cause severe skin diseases and injuries to the fetus, and may also cause male feminization caused great harm to our health also

 

 

Aluminum foil product having good characteristics (density, plasticity and formability properties good) but easily recovered. The recycled waste hetero aluminum has become the most important part of ferrous metal recycling, its energy consumption, regeneration cost than the originalaluminum production is much lower (about 10 percent) is a new environmentally friendly lunch boxes material of choice.

   Disposable aluminum foil products not only non-toxic and environmentally friendly, but also convenient to recycle, conserve resources, protect the environment, disposable aluminum foil snack box will replace the other one-time snack box especially foam or plastic Kuaican,. Is the first choice of our era of low-carbon green living.

 

Characteristics and uses of foil paper, aluminum foil, hotel tinfoil:

1.Aluminum foil series more with the food industry, building insulation industry, wider popularization can be customized according to customer needs.

 

2.Foil tinfoil appearance beautiful, light weight, and after high-temperature sterilization, in line with national food hygiene standards. And recycling convenient, does not produce harmful substances in the process, without polluting renewable resources. Reduce pollution and save resources, can be recycled to use the `green low-carbon life choice.

  

3.Aluminum foil material with barrier properties of plastic flexible packaging materials, aluminum foil aluminum foil is commonly used as barrier materials, and aluminum foil has a number of advantages of lightweight, sealed and coated good. Aluminized film, metallized paper, the milk powder Guankou confined mainly health, beauty, and also a certain degree of insulation.

 

4. Aluminum foil aluminum foil surface coating treatment, not only conducive to the production, and more beautiful appearance, play a better role in blocking, and printing, this foil is not only in line with national consumption of aluminum products and health standards, more importantly, is adapted to the current international environmental trends.

 

Aluminum foil aluminum foil can be directly used for storage, packaging, BBQ / baking, heating and freezing. Foil wrapped with aluminum foil good food directly on the gas stove, oven and microwave heating without any danger, and has brought great convenience to the people.

 

6. For hot method hairdressing industry, hair stylist with aluminum foil wrap hair to heat the hair, the effect of heat transfer. With aluminum foil electric hair incorrectly can lead to burns, hair quality and poor.

 

7. Oil absorption, the difference between the aluminum foil into a ball after the open, you can learn from the soup

 

8 can also be used for other non-food industries such as architectural decoration, central air conditioner pipe insulation has been applied on the reflective surface can increase reflective lampshade other industry.

 

 

Light-blocking aluminum foil aluminum foil, isolated for packaging vegetables, fruits, etc., can prevent the loss of water to maintain the flavor, more anti-bacterial, anti-fouling role.

 

Saw blade selection:

 

 

Aluminum foil tinfoil saw blade has three customers upon request selection.

1. The paper saw blade, directly on the color box on the edge system the triangular saw blade, cutting thickness of less than 0.011mm aluminum foil tinfoil, cutting effect is not very good, and the low-grade, usually less.

2. Hacksaw: 0.17 - 0.23mm1 tinplate stamping processing of fresh aluminum foil can be cut 0.025mm effect, currently the most used.

3 fiber saw blade; environmentally friendly materials, use of effects with the hacksaw, while safe, but the price is a little expensive, are acceptable in use abroad.

Selection of aluminum foil foil method:

   Aluminium Foil Products industry is just emerging in the country, there is no national and industry standards. Fish in the market, some unscrupulous businessmen shoddy profiteering. Factory approved by higher corporate standards development of aluminum foil products, so consumers in the purchase of aluminum foil aluminum foil, aluminum foil, household foil from time to time do not be table like confused, can refer to the following method to purchase:

 

First,Look outside the box: the regular manufacturer registered trademarks, Make the site, contact phones and precautions, and use methods, and indicate the models, specifications. Inferior products do not have these elements.

 

Second, to see the appearance of the product:

1. see color appearance: aluminum foil aluminum foil inside and outside surface smooth light IOUs, black bars or other defects. Volume foil flush cut flat, dry and not damp paper tube.

 

2. to see whether the deterioration: open volume after 1 - 2 layers of foil surface if a white or gray film, deterioration, white or gray alumina foil oxidation generates some manufacturers cheat customers say this is the raw material rolling smooth the roll system, the fact is material deterioration is.

 

3. package is complete: the regular factory sealed with plastic bags packaging Hotel when the product is installed built-in moisture agent packaging, color box moisture agent, of course, non-formal manufacturers, product quality, shelf life, no guarantee.

 

4. understand warehousing methods: aluminum foil tinfoil thin its material liable to absorb moisture and deterioration, to be stored in a dry place, especially after the package is opened, but also to take care of and timely cover after each use to reduce the secondary moisture opportunities. The factory finished warehouse all confined Hopewell equipped with dehumidifiers, humidity is maintained at 55 - 60 degrees all year round, to a warehouse custody due insurable long.

 

5. see qualifications: the regular manufacturers have the relevant departments detection certificate and product quality certification, the general three products can not provide a variety of inspection certificate.

 

 

Quality control:

 

Aluminum foil tinfoil to go through quality inspection before leaving the factory, appearance, health, material thickness, length specification test checks.

 

A.Appearance and health checks.

1.the appearance of the product: the appearance of smooth, only a few wrinkles or fine wrinkles, face is level difference does not exceed 1 mm, volume foil in the center of the paper tube, offset less.

 

2. Incision: The incision using triangular serrated cutting require cutting surface flush

 

3. box printing fine, safe and reliable saw blade.

 

4. Products to maintain health: including debris, dust, oil results.

 

B. The material thickness and trachoma detection.

thickness detection

Pinhole(sandhole) detection

No more than 8 is A grade 4mm * 4mm or any 16 mm2 pinhole visible light visual.

 

Zhongbo Aluminum was founded in 2002 and is a specialist manufacturer and distributor of foil containers and associate packing for all sections of the food industry throughout China, Oceania, Mid East, Europe and North America markets. We manufacture aluminum containers, cling films, aluminum foil rolls and related food packing products.

 

After ten years development, Zhongbo Aluminum have won great support from customers around the world. Thus, our company scale has expanded. Now we have 35 advanced aluminum foil container lines, 1 container packing line and 7 household aluminum foil lines. Each month consuming aluminum foil for over 200 tons, the monthly output is about 1,000,000 pieces.

 

Zhongbo Aluminum also offer all kinds of OEM/ODM services. We have established long-term, stable and good business relationships with many manufacturers and wholesalers around the world. Currently, we are looking forward to even greater cooperation with overseas customers based on mutual benefits.

 

Please feel free to contact us for more details.