Specifications

1,aluminum smooth-wall containers manufacturer,provide you competitive price.
2,top quality,excellent price.

 

This airplane catering aluminum smooth-wall containers with roll edge,it can be silver natural colour,it also can be white coated colour,250 pcs pack in one PE bag,4 PE bag pack in one master carton.

 

Our foil containers, which made of high quality 8011 aluminum alloy stamping, constructed to a curling structure, can be widely used in fast food distribution industry, picnic barbecue party, low-carbon life, health, environmental protection, safely and practically!

 

Takeaway aluminum foil pot, takeaway packaged snack box, aluminum foil boxes can be equipped with four lids are aluminum foil composite paperboard cover, green plastic lid, aluminum foil paper lid, aluminum foil lid.

 

 

1.Aluminum foil composite paperboard cover in the high-side lunch boxes are widely used, 270g, 350g two thicknesses are more commonly used, edge reflexed flatten will cover the food sealed in the box to maintain clean and sanitary fresh not to weartaste, into the microwave oven heating abroad, the most commonly used.

 

2. plastic cover and take-away aluminum foil pot, takeaway packaged snack box, aluminum foil box pairing, the general PVC plastic cover softening temperature a high supporting force is very low, the temperature reached 65 degrees Celsius, will begin to release a name of "two the dioxin toxic substances ------ a 'carcinogenic' material. Recommends using OPS green plastic cover. The factory has a plane production takeout aluminum foil pot and matching green plastic cover.

 

3.the aluminum foil soft cover material thickness 0.01-0.02mm (commonly known as tin foil) wrap aluminum foil box four sides maintain a clean and healthy fresh food sealed in the box to enter the barbecue grill and microwave oven, The most widely used in the aviation lunch boxes. .

4. Aluminum Foil cover processing methods same as aluminum foil box, sometimes aluminum foil lid can also be increased coloring sell, use material thicker beneficial given support force, the size is just right, but also to enter the barbecue grill and microwave oven heating, in aviation lunch boxes and takeaway packaged in aluminum foil to burn a wide range of uses, and is becoming increasingly popular

 

Notes for using in microwave

1. When using a microwave oven, it is recommended to use the barbecue stalls

2.The aluminum foil wrapped food on the middle of the oven, try not to have sharp corners, and do not touch the furnace wall.

3.To check the Microwave applicable text or graphics before using it.

 

 

The characteristics and uses of aluminum foil container, aluminum foil boxes, food container:

 

1. Aluminum foil food container series more for aviation food and cake food and fast food industry, the popularity of broad, can be customized according to customer needs.

 

2. Foil container look beautiful, light weight, after high-temperature sterilization, in line with national food hygiene standards. And recycling convenient does not produce harmful substances in the process, without polluting renewable resources. Reduce pollution and save resources, can be recycled to use the `green low-carbon life choice.

 

3. Aluminum foil material with barrier properties, in the thickness of the aluminum foil enough premise, basically full of gas and moisture barrier, thus, in plastic flexible packaging materials, aluminum foil as a barrier material, and a lightweight aluminum foil, sealed and coating of a series of advantages. Health, beautiful, but also a certain degree of insulation.

 

 4. Aluminum foil food lunch boxes surface after the coating process, not only conducive to production, and more beautiful appearance, played better barrier effect, this lunch box is not only the health standards in line with national food containers, more importantly, is to adapt to the current international environmental trend.

 

5. Aluminum foil container can be used directly for the storage, packaging, barbecue / baking, molding, heating and refrigeration. Foil container can be placed directly on the gas stove, oven and microwave heating without any danger, and has brought great convenience to the people.

 

6.It can also be used for other non-food industry, such as the reflective lighting candles care products, Test Cup Series for chemical experimental tests ,and for oil loading pick oil box series, in all walks of life to be very widely application.

 

 

Quality control of aluminum foils containers

 

Aluminum foil boxes to go through quality inspection before leaving the factory, in the appearance, safety, health, material thickness, product weight, product rigid hardness specification test checks.

 

1.Appearance and health and safety checks.

 

1) Curling appearance: curling appearance sleek not sting, do not cut (scraping) hand, does not crack.

 

2) Bottom of pitting: No pitting at the bottom of the IOUs, no black stripe, no oil spots, etc.

 

3) Products maintain hygiene: no aluminum scrap, debris, sand, bits and pieces, including

 

2. Material thickness and product weight measurement.

 

 

 

3. Product rigid hardness testing

 

 

The purchase method of aluminum foil container, aluminum foil box, aluminum foil food container:

 

Aluminium Foil Products industry is just emerging in the country, there is no national and industry standards. Fish in the market, some unscrupulous businessmen shoddy profiteering. Therefore, consumers in the purchase of a barbecue plate of aluminum foil, aluminum foil boxes do not table like confused, can refer to a purchase in the following methods:

 

 

First,Look outside the box: the regular manufacturer registered trademarks, Make the site, contact phones and precautions, and use methods, and indicate the models, specifications. Inferior products do not have these elements.

 

 

Second, to see the appearance of the product:

 

 

1. see color: high quality aluminum foil inside and outside the barbecue plate surface smooth and light, the IOUs, black bars or other defects strict standard requirements, and Botswana aluminum foil has spearheaded the development of aluminum foil products enterprise standard, the above defects per 10 square centimeters of not more than two .

 

 

2. to see whether the metamorphism: metamorphism foil oxidation generates white or gray alumina metamorphic aluminum foil boxes after the lubricating oil production after all become a road white stripes, some manufacturers cheat customers say this is the raw material rolled bar the stick is not smooth, in fact, is a material deterioration.

 

 

3.see crimping: smooth formal product curling not to hang hand or rarely hang hand, especially aluminum foil barbecue plate all the high-side box (not curling at all four corners), and especially easy to hang hand, subsequent processing or product easy injured hand, there have been suppliers and reparations, is the distribution of aluminum foil boxes abroad must first purchase the Handelsblad insurance to ensure the interests of its clients. Inferior products without formal inspection in quality assurance.

 

 

4.see Hardness: regular factory rigid pick test to ensure that the product hardness and rigidity to meet customer requirements, factory all aluminum foil boxes are strengthened by special rigid design, materials hard, harder hardness in the same material thickness under the conditions better rigidity, reduce the thickness of the materials used in the same hardness and rigidity, and lower cost.

 

 

5. see qualifications: the regular manufacturers have the relevant departments detection certificate and product quality certification, the general three products can not provide a variety of inspection certificate.

 

 

Zhongbo Aluminum was founded in 2002 and is a specialist manufacturer and distributor of foil containers and associate packing for all sections of the food industry throughout China, Oceania, Mid East, Europe and North America markets. We manufacture aluminum containers, cling films, aluminum foil rolls and related food packing products.

 

After ten years development, Zhongbo Aluminum have won great support from customers around the world. Thus, our company scale has expanded. Now we have 35 advanced aluminum foil container lines, 1 container packing line and 7 household aluminum foil lines. Each month consuming aluminum foil for over 200 tons, the monthly output is about 1,000,000 pieces.

 

Zhongbo Aluminum also offer all kinds of OEM/ODM services. We have established long-term, stable and good business relationships with many manufacturers and wholesalers around the world. Currently, we are looking forward to even greater cooperation with overseas customers based on mutual benefits.

 

Please feel free to contact us for more details.