Milky white Glue stick with High viscosity, high quality and free samples
Negotiable /Kilogram
Min.Order:25 Kilograms
Hangzhou Tiankai Import And Export Co., Ltd.
TPU hot melt adhesive powder for leather,Clothing thermal transfer.
Black Polyamide hot melt adhesive used in PCB, mobile phone battery etc
Epoxy resin AB glue used in Surfboards, paddle boards.Surf board resin glue
AB glue/ Epoxy resin AB glue used in LED luminous words, picture frames, handicrafts, badges.
Milky white Glue stick with High viscosity, high quality and free samples
Product Description: | ||||||
1)size: 11.2mm x 300 mm ( free sample 2 pcs) | ||||||
2)Safty and non-toxic | ||||||
3)Any color,size or reqirement for it is available. | ||||||
4)apply to packaging, bookbinding, woodworking, electronics, lamination, shoemaking, | ||||||
craft gluing, hobby work, cabinet making, florist work, upholstery, product assembly etc. | ||||||
5)Versatile adhensive; | ||||||
8)high level adhensive performance | ||||||
7)Smelless ,smokless | ||||||
9)With FDA | ||||||
10)OEM is welcome |
Method of operation:
Glue stick before use please glue gun preheating 3-5 minutes.
Please keep the strip surface clean to prevent impurities block the gun nozzle.
Glue gun when not in use, please stand on the desktop, do not fall flat, otherwise it will cause the collapse of gum phenomenon, resulting from the glue gun burnt out and glue strip coarsening stuck glue gun entrance, not glue.
Glue glue gun is not used up, please try not to strip from the glue gun aside.
If the reverse flow of glue glue gun, please immediately stop using, to be clean finished before use.
Glue gun heated continuously for more than 15 minutes don't, please cut off the power supply.
The recommended temperature: 110~120 °C
packaging: 25 kg carton packaging
transport: non dangerous goods, according to the transport general chemical products.
storage conditions: ventilation, dry, cool place
equipment cleaning method: to equipment manufacturer cleaning equipment, or with mineral oil or paraffin cleaning equipment in 160 °C, then rinse with hot melt adhesive, glue temperature should not exceed 180 °C.
Note:
1, the use of places should be good ventilation, away from the fire.
2, avoid the melted material contact with eyes, skin.
3, if the molten material into contact with the skin, immediately the injured skin immersed in water cooling, hospitalized.